Duet-Maestro-Menu/meshcomp

M291 P"Homing all axes"
G28
M291 P"Heating bed & nozzle"
M190 S50
M109 S180
M291 P"Running mesh compensation"
G29
M291 P"Done - turning heaters off"
M140 S0	
M140 S-273.15 R-273.15
G10 P0 S-273.15 R-273.15
Update meshcomp Using M291 instead of M117 for messages. 2019-02-03 23:40:04 +11:00			`M291 P"Homing all axes"`
Added ability to run mesh bed compensation Added ability to run mesh bed compensation directly from the 12864 screen (under the control (ctrl) menu). This will home all axes, heat the bed to 50C and the nozzle to 180C before running the bed compensation routing acording to the grid parameters set in config.g 2019-01-30 22:07:19 +11:00			`G28`
Update meshcomp Using M291 instead of M117 for messages. 2019-02-03 23:40:04 +11:00			`M291 P"Heating bed & nozzle"`
Added ability to run mesh bed compensation Added ability to run mesh bed compensation directly from the 12864 screen (under the control (ctrl) menu). This will home all axes, heat the bed to 50C and the nozzle to 180C before running the bed compensation routing acording to the grid parameters set in config.g 2019-01-30 22:07:19 +11:00			`M190 S50`
			`M109 S180`
Update meshcomp Using M291 instead of M117 for messages. 2019-02-03 23:40:04 +11:00			`M291 P"Running mesh compensation"`
Added ability to run mesh bed compensation Added ability to run mesh bed compensation directly from the 12864 screen (under the control (ctrl) menu). This will home all axes, heat the bed to 50C and the nozzle to 180C before running the bed compensation routing acording to the grid parameters set in config.g 2019-01-30 22:07:19 +11:00			`G29`
Update meshcomp Using M291 instead of M117 for messages. 2019-02-03 23:40:04 +11:00			`M291 P"Done - turning heaters off"`
Update meshcomp 2019-01-30 22:14:34 +11:00			`M140 S0`
			`M140 S-273.15 R-273.15`
			`G10 P0 S-273.15 R-273.15`