quick fix spacebar dishes

hull() was not working properly with such a wide bottom shape - since envelope was using a bottom square that was 6.25uX6.25u. that might spell trouble for 2x2 POS keycaps though... this should be changed to a skin() function down the line

CHANGELOG.md

@@ -13,13 +13,4 @@ CHANGELOG:
     * `$linear_extrude_shape` and `$skin_extrude_shape` retired in favor of `$hull_shape_type`
     * added regular_polygon shape and octagonal and hexagonal key profiles
     * added beta kailh choc
-    * Finally got ISO Enter working correctly!
+    * Finally got ISO Enter working correctly!
-    * STILL TODO:
-      * add a magic scaling variable so you can scale the whole world up, see if that fixes degeneracy
-      * Make flat stem support default
-      * make flat inner shape default
-      * new_key_structure changes doesn't take into account support stems properly; fix
-      * support repositioning to print on the back surface of the keycap
-      * implement regular polygon for skin extrusions
-      * switch to skin-shaped extrusions by default
-      * kailh choc has a non-square key unit; should I get that working for layouts etc? 

README.md

@@ -9,6 +9,14 @@ Relevant links:
 * Shapeways: https://www.shapeways.com/designer/rsheldiii/creations
 * Buy me a coffee: https://ko-fi.com/rsheldiii, but only if you want to!
 
+# V2.0.0 Cutover
+
+As of February 19th, 2022, the v2.0.0 branch has been merged into master.
+
+This branch completely rewrote key.scad to be much simpler and faster. If you're just starting out, please use master and report any bugs you find.
+
+If you branched off this repo previously, merging to master will probably break any additions you've made. If you need the prior version of the code for whatever reason, v1.1.0 is master just before the v2.0.0 merge. I will be backporting bugfixes to the v1 branch, so if you see v1.1.1 or higher, use that instead.
+
 ## How to run
 
 #### OpenSCAD Proper (recommended way)
@@ -17,7 +25,19 @@ If you are technically inclined at all, this is definitely the best way to run t
 
 First, you'll need OpenSCAD: http://www.openscad.org/downloads.html. I highly recommend installing the development snapshot, as they generally support more features and are relatively stable. Development snapshots are listed in their own section on the downloads page.
 
-After you have openSCAD installed, you need to download the code and run it. running `git clone https://github.com/rsheldiii/openSCAD-projects.git` if you have git, or downloading [this zip](https://github.com/rsheldiii/openSCAD-projects/archive/master.zip) and extracting the directory should do it. Then all you need to do is open `keys.scad` with openSCAD and you are set! It is possible to edit this project with an external editor by checking off Design => 'Automatic Reload and Preview' in OpenSCAD.
+After you have openSCAD installed, you need to download the code and run it. running `git clone https://github.com/rsheldiii/openSCAD-projects.git` if you have git, or downloading [this zip](https://github.com/rsheldiii/openSCAD-projects/archive/master.zip) and extracting the directory should do it. 
+
+To make your own key, all you need to do is open `keys.scad` with openSCAD and modify this line:
+
+```
+dcs_row(5) legend("⇪", size=9) key();
+``` 
+
+To be whatever you want. For example, this is for a ctrl key on an OEM keyboard:  
+
+```u(1.25) oem_row(3) legend("ctrl", size=4.5) key();```
+
+It is possible to edit this project with an external editor by checking off Design => 'Automatic Reload and Preview' in OpenSCAD.
 
 All examples below assume you are running the library on your computer with OpenSCAD.
 
@@ -70,7 +90,7 @@ These modifier functions may not cover every use case; in that case, you may hav
 
 new to the library and still in a beta state, layouts allows you to generate an entire layout for a keyboard!
 
-It is recommended to use tined stem support and set `$extra_long_stem_support = true` if you plan on printing these keycaps.
+It is recommended to print layouts with a brim that extends to the next key.
 
 ```
 60_percent_default("dcs") key();
@@ -169,7 +189,7 @@ Prints from this library are still challenging, despite all efforts to the contr
 
 1. If your stem isn't fitting in the switch, try upping the slop factor, accessed by giving your keystem function a numeric value (eg `cherry(0.5) key()`). This will lengthen the cross and decrease the overall size of the keystem. The default value is 0.3, and represents millimeters. Note that even if you have a resin printer, you should probably keep the default value; keys printed with 0 slop will barely fit on the stem.
 
-2. If your keystem breaks off the bed mid-print, you can enable a brim by adding the `brimmed()` modifier. This will give a solid base for the keystem to anchor into.
+2. If your keystem breaks off the bed mid-print, you can enable a brim by adding the `brimmed_stem_support()` modifier. This will give a solid base for the keystem to anchor into.
 
 3. If you are unsatisfied with the quality of the top surface, you can try printing the keycap on a different surface than the bottom, though it may impact the quality of the stem.
 
@@ -178,9 +198,7 @@ Prints from this library are still challenging, despite all efforts to the contr
 That's it, if you have any questions feel free to open an issue or leave a comment on thingiverse!
 
 ## TODO:
- * replace linear_extrude_shape_hull with skin_extrude_shape_hull or something, to enable concave extrusions
+moved to [TODO doc](./TODO.md)
- * replace current ISO enter shape with one that works for `skin()`
- * generate dishes via math?
 
 ## Contributions welcome
 

TODO.md

@@ -0,0 +1,13 @@
+TODO:
+  * implement key_shape_at_progress which allows you to query for the exact 2d outline of the keycap at a given height
+    * this makes certain functions easier - building the envelope for instance
+    * requires breaking out shape_slice, and creating a polygon of the skin_shape_slice slices
+  * dishes add / remove height from keycaps, particularly spherical dishes
+    * a bandaid solution would be to allow you to modify where the keytop is along the progression of the keycap
+      * you can't just set a new total_depth because of how width_difference and height_difference work
+    * the true solution would be to rewrite how the dishes work to make them very graduated at the edges
+  * implement regular polygon for skin extrusions
+  * switch to skin-shaped extrusions by default
+  * kailh choc has a non-square key unit; should I get that working for layouts etc? 
+  * move everything over to layouts requiring a child key
+  * add an "errors" or "warnings" or "suggestions" echo section in key.scad, right when the key is being made, so the errors don't get lost / repeated

keys.scad

@@ -17,4 +17,4 @@ dcs_row(5) legend("⇪", size=9) key();
 } */
 
 // example layout
-/* preonic_default("dcs"); */
+/* preonic_default("dcs") key(); */

src/dishes.scad

@@ -4,7 +4,10 @@ include <dishes/cylindrical.scad>
 include <dishes/old_spherical.scad>
 include <dishes/sideways_cylindrical.scad>
 include <dishes/spherical.scad>
+include <dishes/squared_spherical.scad>
+include <dishes/squared_scoop.scad>
 include <dishes/flat.scad>
+include <dishes/3d_surface.scad>
 
 //geodesic looks much better, but runs very slow for anything above a 2u
 geodesic=false;
@@ -13,19 +16,22 @@ geodesic=false;
 module  dish(width, height, depth, inverted) {
     if($dish_type == "cylindrical"){
       cylindrical_dish(width, height, depth, inverted);
-    }
+    } else if ($dish_type == "spherical") {
-    else if ($dish_type == "spherical") {
       spherical_dish(width, height, depth, inverted);
-    }
+    } else if ($dish_type == "sideways cylindrical"){
-    else if ($dish_type == "sideways cylindrical"){
       sideways_cylindrical_dish(width, height, depth, inverted);
-    }
+    } else if ($dish_type == "old spherical") {
-    else if ($dish_type == "old spherical") {
       old_spherical_dish(width, height, depth, inverted);
+    } else if ($dish_type == "3d surface") {
+      3d_surface_dish(width, height, depth, inverted);
     } else if ($dish_type == "flat") {
       flat_dish(width, height, depth, inverted);
     } else if ($dish_type == "disable") {
       // else no dish
+    } else if ($dish_type == "squared spherical") {
+      squared_spherical_dish(width, height, depth, inverted=inverted);
+    } else if ($dish_type == "squared scoop") {
+      squared_scoop_dish(width, height, depth, inverted=inverted);
     } else {
       echo("WARN: $dish_type unsupported");
     }

src/dishes/3d_surface.scad

@@ -6,9 +6,11 @@ module 3d_surface_dish(width, height, depth, inverted) {
   // it doesn't have to be dead reckoning for anything but sculpted sides
   // we know the angle of the sides from the width difference, height difference,
   // skew and tilt of the top. it's a pain to calculate though
-  scale_factor = 1.1;
+  scale_factor = 1.05;
   // the edges on this behave differently than with the previous dish implementations
-  scale([width*scale_factor/$3d_surface_size/2,height*scale_factor/$3d_surface_size/2,depth]) rotate([inverted ? 0:180,0,180]) polar_3d_surface(bottom=-10);
+  scale([width*scale_factor/$3d_surface_size/2,height*scale_factor/$3d_surface_size/2,depth])
+    rotate([inverted ? 0:180,0,180])
+      polar_3d_surface(size=$3d_surface_size, step=$3d_surface_step, bottom=-10);
   /* %scale([width*scale_factor/$3d_surface_size/2,height*scale_factor/$3d_surface_size/2,depth]) rotate([180,0,0]) polar_3d_surface(bottom=-10); */
 
 }

src/dishes/spherical.scad

@@ -1,4 +1,8 @@
 module spherical_dish(width, height, depth, inverted){
+  // these variables take into account corner_radius and corner_sculpting, resulting in a more correct dish
+  // they don't fix the core issue though (dishes adding / subtracting height on the edges of the keycap), so I've disabled them
+  // new_width = $key_shape_type == "sculpted_square" ? width - distance_between_circumscribed_and_inscribed($corner_radius + $corner_sculpting(1)) : width;
+  // new_height = $key_shape_type == "sculpted_square" ? height - distance_between_circumscribed_and_inscribed($corner_radius + $corner_sculpting(1)) : height;
 
   //same thing as the cylindrical dish here, but we need the corners to just touch - so we have to find the hypotenuse of the top
   chord = pow((pow(width,2) + pow(height, 2)),0.5); //getting diagonal of the top

src/dishes/squared_scoop.scad

@@ -0,0 +1,34 @@
+module squared_scoop_dish(height, width, depth, r=0.5, inverted=false, num=4, den=5){
+  // changable numerator/denoninator on where to place the square's corners
+  // for example, num=2, den=3 means the dish will happen at 1/3 and 2/3 the
+  // width and the height.  Defaults to 4/5. Customizable when calling 
+  // this module
+  //
+  // This was initially intended for the scoop on the HiPro, since that's what
+  // it uses.  Use "hipro_row()" if that's what you'd like.  However, I do NOT
+  // know how close the inner square is for the HiPro keycaps.  In fact, it could
+  // just be a sphere, in which the "squared spherical" scoop is more appropriate.
+  // If, however, it the "squared scoop" makes sense, you can adjust where the square
+  // lands with the num (numerator) and den (denominator) variables.  For instance,
+  // "3" and "4" mean 3/4 of the width/height is where the flat part starts.
+
+  chord = pow(pow(height/2, 2) + pow(width/2, 2),0.5);
+  direction = inverted ? -1 : 1;
+
+  //This is the set of points to hull around for the scoop
+  points=[
+    [height/den - height/2, width/den - width/2, -chord],
+    [num*height/den - height/2, width/den - width/2, -chord],
+    [height/den - height/2, num*width/den - width/2, -chord],
+    [num*height/den - height/2, num*width/den - width/2, -chord]
+  ];
+
+  resize([height,width,depth])
+    hull() {
+      shape_slice(1,0,0);
+      for(i=[0:len(points)-1]) {
+        translate(points[i])
+          sphere(r=r,$fn=64);
+      }
+  }
+}

src/dishes/squared_spherical.scad

@@ -0,0 +1,22 @@
+module squared_spherical_dish(width, height, depth, inverted=false) {
+    chord = pow(pow(height / 2, 2) + pow(width / 2, 2),0.5);
+    direction = inverted ? -1 : 1;
+    r=max(height,width,chord) / 5;
+    // ^^^^^ Nothing special about this code to figure out r.
+    // I just modeled up 1u, 1.25u, 1.5u, 2u, 2.25u, and 2.75u
+    // keys and messed around until I came up with something that
+    // looked reasonable for all key sizes.  This just seems to work
+    // well for all sizes
+
+    translate([-width / 2, -height / 2, 0 * direction]) {
+      resize([width, height, depth])
+        hull() {
+          cube([chord,chord,0.001]);
+          // Use something larger in this translate than -depth 
+          // (like -chord) if you want more of a defined circle
+          // in the keywell
+          translate([chord/2, chord/2, -depth]) 
+            sphere(r=r, $fn=128);
+        }
+    }
+}

src/features/legends.scad

@@ -1,9 +1,9 @@
-module keytext(text, position, font_size, depth) {
+module keytext(text, position, font_size, font_face, depth) {
   woffset = (top_total_key_width()/3.5) * position[0];
   hoffset = (top_total_key_height()/3.5) * -position[1];
   translate([woffset, hoffset, -depth]){
     color($tertiary_color) linear_extrude(height=$dish_depth + depth){
-      text(text=text, font=$font, size=font_size, halign="center", valign="center");
+      text(text=text, font=font_face, size=font_size, halign="center", valign="center");
     }
   }
 }
@@ -12,14 +12,14 @@ module legends(depth=0) {
   if (len($front_legends) > 0) {
     front_of_key() {
       for (i=[0:len($front_legends)-1]) {
-        rotate([90,0,0]) keytext($front_legends[i][0], $front_legends[i][1], $front_legends[i][2], depth);
+        rotate([90,0,0]) keytext($front_legends[i][0], $front_legends[i][1], $front_legends[i][2], $front_legends[i][3], depth);
   	  }
     }
   }
   if (len($legends) > 0) {
     top_of_key() {
       for (i=[0:len($legends)-1]) {
-        keytext($legends[i][0], $legends[i][1], $legends[i][2], depth);
+        keytext($legends[i][0], $legends[i][1], $legends[i][2], $legends[i][3], depth);
       }
     }
   }

src/functions.scad

@@ -1,10 +1,11 @@
 include <constants.scad>
+include <settings.scad>
 
 // I use functions when I need to compute special variables off of other special variables
 // functions need to be explicitly included, unlike special variables, which
 // just need to have been set before they are used. hence this file
 
-function stem_height() = $total_depth - $dish_depth - $stem_inset;
+function stem_height() = $total_depth - ($dish_depth * ($inverted_dish ? -1 : 1))  - $stem_inset;
 
 // cherry stem dimensions
 function outer_cherry_stem(slop) = [7.2 - slop * 2, 5.5 - slop * 2];
@@ -23,6 +24,10 @@ function cherry_cross(slop, extra_vertical = 0) = [
   [1.15 + slop / 3, 4.23 + extra_vertical + slop / 3 + SMALLEST_POSSIBLE],
 ];
 
+// TODO add side_sculpting
+function key_width_at_progress(progress = 0) = $bottom_key_width + ($unit * ($key_length - 1)) - $width_difference;
+function key_height_at_progress(progress = 0) = $bottom_key_height + ($unit * ($key_height - 1)) - $height_difference + $side_sculpting(progress);
+
 // actual mm key width and height
 function total_key_width(delta = 0) = $bottom_key_width + $unit * ($key_length - 1) - delta;
 function total_key_height(delta = 0) = $bottom_key_height + $unit * ($key_height - 1) - delta;
@@ -33,7 +38,7 @@ function top_total_key_height() = $bottom_key_height + ($unit * ($key_height - 1
 
 function side_tilt(column) = asin($unit * column / $double_sculpt_radius);
 // tan of 0 is 0, division by 0 is nan, so we have to guard
-function extra_side_tilt_height(column) = side_tilt(column) ? ($double_sculpt_radius - (unit * abs(column)) / tan(abs(side_tilt(column)))) : 0;
+function extra_side_tilt_height(column) = side_tilt(column) ? ($double_sculpt_radius - ($unit * abs(column)) / tan(abs(side_tilt(column)))) : 0;
 
 // (I think) extra length of the side of the keycap due to the keytop being tilted.
 // necessary for calculating flat sided keycaps
@@ -43,26 +48,11 @@ function vertical_inclination_due_to_top_tilt() = sin($top_tilt) * (top_total_ke
 // I derived this through a bunch of trig reductions I don't really understand.
 function extra_keytop_length_for_flat_sides() = ($width_difference * vertical_inclination_due_to_top_tilt()) / ($total_depth);
 
-// 3d surface functions (still in beta)
+// adds uniform rounding radius for round-anything polyRound
+function add_rounding(p, radius)=[for(i=[0:len(p)-1])[p[i].x,p[i].y, radius]];
+// computes millimeter length from unit length
+function unit_length(length) = $unit * (length - 1) + 18.16;
 
-// monotonically increasing function that distributes the points of the surface mesh
+// if you have a radius of an inscribed circle, this function gives you the extra length for the radius of the circumscribed circle
-// only for polar_3d_surface right now
+// and vice versa. used to find the edge of a rounded_square
-// if it's linear it's a grid. sin(dim) * size concentrates detail around the edges
+function distance_between_circumscribed_and_inscribed(radius) = (pow(2, 0.5) - 1) * radius;
-function surface_distribution_function(dim, size) = sin(dim) * size;
-
-// the function that actually determines what the surface is.
-// feel free to override, the last one wins
-
-// debug
-function surface_function(x,y) = 1;
-// cylindrical
-function surface_function(x,y) = (sin(acos(x/$3d_surface_size)));
-// spherical
-function surface_function(x,y) = (sin(acos(x/$3d_surface_size))) * sin(acos(y/$3d_surface_size));
-// (statically) random!
-// ripples
-/* function surface_function(x,y) = cos(pow(pow(x,2)+pow(y,2),0.5)*10)/4+0.75; */
-// Rosenbrock's banana
-/* function surface_function(x,y) = (pow(1-(x/100), 2) + 100 * pow((y/100)-pow((x/100),2),2))/200 + 0.1; */
-// y=x revolved around the y axis
-/* function surface_function(x,y) = 1/(pow(pow(x,2)+pow(y,2),0.5)/100 + .01); */

src/hulls/hull.scad

@@ -1,13 +1,13 @@
 module hull_shape_hull(thickness_difference, depth_difference, extra_slices = 0) {
   for (index = [0:$height_slices - 1 + extra_slices]) {
     hull() {
-      shape_slice(index / $height_slices, thickness_difference, depth_difference);
+      placed_shape_slice(index / $height_slices, thickness_difference, depth_difference);
-      shape_slice((index + 1) / $height_slices, thickness_difference, depth_difference);
+      placed_shape_slice((index + 1) / $height_slices, thickness_difference, depth_difference);
     }
   }
 }
 
-module shape_slice(progress, thickness_difference, depth_difference) {
+module placed_shape_slice(progress, thickness_difference, depth_difference) {
   skew_this_slice = $top_skew * progress;
   x_skew_this_slice = $top_skew_x * progress;
 
@@ -18,16 +18,20 @@ module shape_slice(progress, thickness_difference, depth_difference) {
 
   translate([x_skew_this_slice, skew_this_slice, depth_this_slice]) {
     rotate([tilt_this_slice,y_tilt_this_slice,0]){
-      linear_extrude(height = SMALLEST_POSSIBLE, scale = 1){
+      shape_slice(progress, thickness_difference, depth_difference);
-        key_shape(
-          [
-            total_key_width(thickness_difference),
-            total_key_height(thickness_difference)
-          ],
-          [$width_difference, $height_difference],
-          progress
-        );
-      }
     }
   }
 }
+
+module shape_slice(progress, thickness_difference, depth_difference) {
+  linear_extrude(height = SMALLEST_POSSIBLE, scale = 1){
+    key_shape(
+      [
+        total_key_width(thickness_difference),
+        total_key_height(thickness_difference)
+      ],
+      [$width_difference, $height_difference],
+      progress
+    );
+  }
+}

src/hulls/skin.scad

@@ -23,8 +23,8 @@ function skin_shape_slice(progress, thickness_difference, skew_this_slice, x_ske
     transform(
       rotation([tilt_this_slice,y_tilt_this_slice,0]),
         skin_key_shape([
-          total_key_width(0),
+          total_key_width(0) - thickness_difference,
-          total_key_height(0),
+          total_key_height(0) - thickness_difference,
           ],
           [$width_difference, $height_difference],
           progress,

src/key.scad

@@ -1,4 +1,5 @@
 // files
+include <constants.scad>
 include <functions.scad>
 include <shapes.scad>
 include <stems.scad>
@@ -16,20 +17,13 @@ use <libraries/scad-utils/lists.scad>
 use <libraries/scad-utils/shapes.scad>
 use <libraries/skin.scad>
 
-/* [Hidden] */
+// key shape including dish. used as the outside and inside shape in hollow_key(). allows for itself to be shrunk in depth and width / height
-SMALLEST_POSSIBLE = 1/128;
-// basically disable $fs - though it might be useful for these CGAL problems
-$fs = .01;
-$unit = 19.05;
-
-// key shape including dish. used as the ouside and inside shape in hollow_key(). allows for itself to be shrunk in depth and width / height
 module shape(thickness_difference, depth_difference=0){
   dished(depth_difference, $inverted_dish) {
     color($primary_color) shape_hull(thickness_difference, depth_difference, $inverted_dish ? 200 : 0);
   }
 }
 
-// Not currently used due to CGAL errors. Rounds the shape via minkowski
 module rounded_shape() {
   color($primary_color) minkowski(){
     // half minkowski in the z direction
@@ -52,12 +46,13 @@ module minkowski_object() {
   }
 }
 
-module envelope(depth_difference=0) {
+module envelope(depth_difference=0, extra_floor_depth=0) {
-  s = 1.5;
+  size = 1.5;
+  
   hull(){
-    cube([total_key_width() * s, total_key_height() * s, 0.01], center = true);
+    translate([0,0,extra_floor_depth]) cube([key_width_at_progress(extra_floor_depth / $total_depth) * size, key_height_at_progress(extra_floor_depth / $total_depth) * size, 0.01], center = true);
     top_placement(SMALLEST_POSSIBLE + depth_difference){
-      cube([top_total_key_width() * s, top_total_key_height() * s, 0.01], center = true);
+      cube([top_total_key_width() * size, top_total_key_height() * size, 0.01], center = true);
     }
   }
 }
@@ -70,18 +65,22 @@ module dished(depth_difference = 0, inverted = false) {
     children();
     difference(){
       union() {
-        // envelope is needed to "fill in" the rest of the keycap
+        // envelope is needed to "fill in" the rest of the keycap. intersections with small objects are much faster than differences with large objects
-        envelope(depth_difference);
+        envelope(depth_difference, $stem_inset);
-        if (inverted) top_placement(depth_difference) _dish(inverted);
+        if (inverted) top_placement(depth_difference) color($secondary_color) _dish(inverted);
       }
-      if (!inverted) top_placement(depth_difference) _dish(inverted);
+      if (!inverted) top_placement(depth_difference) color($secondary_color) _dish(inverted);
+      // %top_placement(depth_difference) _dish();
     }
   }
 }
 
 // just to DRY up the code
+// TODO is putting special vars in function signatures legal
 module _dish(inverted=$inverted_dish) {
-  color($secondary_color) dish(top_total_key_width() + $dish_overdraw_width, top_total_key_height() + $dish_overdraw_height, $dish_depth, inverted);
+  translate([$dish_offset_x,0,0]) color($secondary_color) 
+  dish(top_total_key_width() + $dish_overdraw_width, top_total_key_height() + $dish_overdraw_height, $dish_depth, inverted);
+  // %dish(top_total_key_width() + $dish_overdraw_width, top_total_key_height() + $dish_overdraw_height, $dish_depth, inverted);
 }
 
 // puts its children at each keystem position provided
@@ -103,7 +102,7 @@ module support_for(positions, stem_type) {
 
 module stems_for(positions, stem_type) {
   keystem_positions(positions) {
-    color($tertiary_color) stem(stem_type, stem_height(), $stem_slop);
+    color($tertiary_color) stem(stem_type, stem_height(), $stem_slop, $stem_throw);
     if ($stem_support_type != "disable") {
       color($quaternary_color) stem_support($stem_support_type, stem_type, $stem_support_height, $stem_slop);
     }
@@ -115,9 +114,9 @@ module top_placement(depth_difference=0) {
   top_tilt_by_height = -$top_tilt / $key_height;
   top_tilt_y_by_length = $double_sculpted ? (-$top_tilt_y / $key_length) : 0;
 
-  minkowski_height = $rounded_key ? $minkowski_radius : 0;
+  // minkowski_height = $rounded_key ? $minkowski_radius : 0;
 
-  translate([$top_skew_x + $dish_skew_x, $top_skew + $dish_skew_y, $total_depth - depth_difference + minkowski_height/2]){
+  translate([$top_skew_x + $dish_skew_x, $top_skew + $dish_skew_y, $total_depth - depth_difference]){
     rotate([top_tilt_by_height, top_tilt_y_by_length,0]){
       children();
     }
@@ -157,14 +156,20 @@ module front_of_key() {
 }
 
 module outer_shape() {
-  shape(0, 0);
+  if ($rounded_key == true) {
+    rounded_shape();
+  } else {
+    shape(0, 0);
+  }
 }
 
 module inner_shape(extra_wall_thickness = 0, extra_keytop_thickness = 0) {
   if ($inner_shape_type == "flat") {
     /* $key_shape_type="square"; */
     $height_slices = 1;
-    color($primary_color) shape_hull($wall_thickness + extra_wall_thickness, $keytop_thickness + extra_keytop_thickness, 0);
+    // if inner_shape is flat, keytop_thickness will be dish_depth less than it should be, since the dish digs in that far.
+    // so, we add dish_depth here
+    color($primary_color) shape_hull($wall_thickness + extra_wall_thickness, $keytop_thickness + extra_keytop_thickness + $dish_depth, 0);
   } else {
     shape($wall_thickness + extra_wall_thickness, $keytop_thickness + extra_keytop_thickness);
   }
@@ -193,6 +198,17 @@ module subtractive_features(inset) {
   /* if ($clearance_check) clearance_check(); */
 }
 
+// features inside the key itself (stem, supports, etc)
+module inside_features() {
+  // Stems and stabilizers are not "inside features" unless they are fully
+  // contained inside the cap. otherwise they'd be cut off when they are
+  // differenced with the outside shape. this only matters if $stem_inset
+  // is negative
+  if ($stem_inset >= 0) stems_and_stabilizers();
+  if ($support_type != "disable") translate([0, 0, $stem_inset]) support_for($stem_positions, $stem_type);
+  if ($stabilizer_type != "disable") translate([0, 0, $stem_inset]) support_for($stabilizers, $stabilizer_type);
+}
+
 // all stems and stabilizers
 module stems_and_stabilizers() {
   translate([0, 0, $stem_inset]) {
@@ -201,15 +217,6 @@ module stems_and_stabilizers() {
   }
 }
 
-// features inside the key itself (stem, supports, etc)
-module inside_features() {
-  // Stems and stabilizers are not "inside features" unless they are fully
-  // contained inside the cap. otherwise they'd be cut off when they are
-  // differenced with the outside shape
-  if ($stem_inset >= 0) stems_and_stabilizers();
-  if ($support_type != "disable") translate([0, 0, $stem_inset]) support_for($stem_positions, $stem_type);
-}
-
 // helpers for doubleshot keycaps for now
 module inner_total_shape() {
   difference() {
@@ -229,10 +236,12 @@ module outer_total_shape(inset=false) {
 // takes all the bits and glues them together. requires configuration with special variables.
 module key(inset=false) {
   difference(){
-    outer_total_shape(inset);
+    outer_total_shape(inset) {
+      children();
+    };
 
     if ($inner_shape_type != "disable") {
-      translate([0,0,-SMALLEST_POSSIBLE]) {
+      translate([0,0,-SMALLEST_POSSIBLE]) { // avoids moire
         inner_total_shape();
       }
     }
@@ -242,10 +251,12 @@ module key(inset=false) {
     };
   }
 
-  // if $stem_inset is less than zero, we add the
+  // semi-hack to make sure negative inset stems don't poke through the top of the keycap
   if ($stem_inset < 0) {
-    stems_and_stabilizers();
+    dished(0, $inverted_dish) {
-  }
+      stems_and_stabilizers();
+    }
+  } 
 }
 
 // actual full key with space carved out and keystem/stabilizer connectors

src/key_profiles.scad

@@ -8,8 +8,14 @@ include <key_profiles/dsa.scad>
 include <key_profiles/sa.scad>
 include <key_profiles/g20.scad>
 include <key_profiles/hipro.scad>
+include <key_profiles/mt3.scad>
 include <key_profiles/grid.scad>
 include <key_profiles/regular_polygon.scad>
+include <key_profiles/cherry.scad>
+include <key_profiles/dss.scad>
+include <key_profiles/asa.scad>
+include <key_profiles/typewriter.scad>
+include <key_profiles/hex.scad>
 
 // man, wouldn't it be so cool if functions were first order
 module key_profile(key_profile_type, row, column=0) {
@@ -19,18 +25,30 @@ module key_profile(key_profile_type, row, column=0) {
     oem_row(row, column) children();
   } else if (key_profile_type == "dsa") {
     dsa_row(row, column) children();
+  } else if (key_profile_type == "dss") {
+    dss_row(row, column) children();
   } else if (key_profile_type == "sa") {
     sa_row(row, column) children();
+  } else if (key_profile_type == "asa") {
+    asa_row(row, column) children();
   } else if (key_profile_type == "g20") {
     g20_row(row, column) children();
   } else if (key_profile_type == "hipro") {
     hipro_row(row, column) children();
   } else if (key_profile_type == "grid") {
     grid_row(row, column) children();
+  } else if (key_profile_type == "typewriter") {
+    typewriter_row(row, column) children();
+  } else if (key_profile_type == "hex") { // reddit.com/r/MechanicalKeyboards/comments/kza7ji
+    hex_row(row, column) children();
   } else if (key_profile_type == "hexagon") {
     hexagonal_row(row, column) children();
   } else if (key_profile_type == "octagon") {
     octagonal_row(row, column) children();
+  } else if (key_profile_type == "cherry") {
+    cherry_row(row, column) children();
+  } else if (key_profile_type == "mt3") {
+    mt3_row(row, column) children();  
   } else if (key_profile_type == "disable") {
     children();
   } else {

src/key_profiles/asa.scad

@@ -0,0 +1,44 @@
+use <../functions.scad>
+include <../settings.scad>
+
+module asa_row(row=3, column = 0) {
+$key_shape_type = "sculpted_square";
+  $bottom_key_height = 18.15;
+  $bottom_key_width = 18.10;      // Default (R3)
+  $total_depth = 10.75;           // Default (R3)
+  $top_tilt = 1.5;                // Default (R3)
+  $width_difference = 6.20;
+  $height_difference = 6.55;
+  $dish_type = "spherical";
+  $dish_depth = 1.3;
+  $dish_skew_x = 0;
+  $dish_skew_y = 0;
+  $top_skew = 1.75;
+  $stem_inset = 1.2;
+  $height_slices = 10;
+
+  $corner_radius = 1;
+  $more_side_sculpting_factor = 0.4;
+
+  $side_sculpting = function(progress) (1 - progress) * 4.5;
+  $corner_sculpting = function(progress) pow(progress, 2);
+
+  // this is _incredibly_ intensive
+  //$rounded_key = true;
+
+  if (row == 1){
+    $total_depth = 10.5;
+    $top_tilt = 9.33;
+    children();
+  } else if (row == 2) {
+    $total_depth = 9.95;
+    $top_tilt = 4;
+    children();
+  } else if (row == 4){
+    $total_depth = 12.55;
+    $top_tilt = 0.43;
+    children();
+  }else{
+    children();
+  }  		
+}

src/key_profiles/cherry.scad

@@ -0,0 +1,51 @@
+use <../functions.scad>
+include <../settings.scad>
+
+// based off GMK keycap set
+
+module cherry_row(row=3, column=0) {
+  $bottom_key_width = 18.16;
+  $bottom_key_height = 18.16;
+  $width_difference = $bottom_key_width - 11.85;
+  $height_difference = $bottom_key_height - 14.64;
+  $dish_type = "cylindrical";
+  $dish_depth = 0.65;
+  $dish_skew_x = 0;
+  $dish_skew_y = 0;
+  $top_skew = 2;
+
+  $top_tilt_y = side_tilt(column);
+  extra_height = $double_sculpted ? extra_side_tilt_height(column) : 0;
+
+  // NOTE: cherry keycaps have this stem inset, but I'm reticent to turn it on
+  // since it'll be surprising to folks. the height has been adjusted accordingly
+  // $stem_inset = 0.6;
+  extra_stem_inset_height = max(0.6 - $stem_inset, 0);
+
+  // <= is a hack so you can do these in a for loop. function row = 0
+  if (row <= 1) {
+    $total_depth = 9.8 - extra_stem_inset_height + extra_height;
+    $top_tilt = 0;
+
+    children();
+  } else if (row == 2) {
+    $total_depth = 7.45 - extra_stem_inset_height + extra_height;
+    $top_tilt = 2.5;
+
+    children();
+  } else if (row == 3) {
+    $total_depth = 6.55 - extra_stem_inset_height + extra_height;
+    $top_tilt = 5;
+    children();
+  } else if (row == 3) {
+    $total_depth = 6.7 + 0.65 - extra_stem_inset_height + extra_height;
+    $top_tilt = 11.5;
+    children();
+  } else if (row >= 4) {
+    $total_depth = 6.7 + 0.65 - extra_stem_inset_height + extra_height;
+    $top_tilt = 11.5;
+    children();
+  } else {
+    children();
+  }
+}

src/key_profiles/dcs.scad

@@ -1,3 +1,6 @@
+use <../functions.scad>
+include <../settings.scad>
+
 module dcs_row(row=3, column=0) {
   $bottom_key_width = 18.16;
   $bottom_key_height = 18.16;

src/key_profiles/dsa.scad

@@ -1,3 +1,6 @@
+use <../functions.scad>
+include <../settings.scad>
+
 module dsa_row(row=3, column = 0) {
   $key_shape_type = "sculpted_square";
   $bottom_key_width = 18.24; // 18.4;
@@ -11,8 +14,12 @@ module dsa_row(row=3, column = 0) {
   $dish_skew_x = 0;
   $dish_skew_y = 0;
   $height_slices = 10;
-  $enable_side_sculpting = true;
+
-  $corner_radius = 0.25;
+  $side_sculpting = function(progress) (1 - progress) * 4.5;
+  $corner_sculpting = function(progress) pow(progress, 2);
+  
+  $corner_radius = 1;
+  $more_side_sculpting_factor = 0.4;
 
   $top_tilt_y = side_tilt(column);
   extra_height = $double_sculpted ? extra_side_tilt_height(column) : 0;

src/key_profiles/dss.scad

@@ -0,0 +1,55 @@
+use <../functions.scad>
+include <../settings.scad>
+
+module dss_row(n=3, column=0) {
+  $key_shape_type = "sculpted_square";
+  $bottom_key_width = 18.24;
+  $bottom_key_height = 18.24;
+  $width_difference = 6;
+  $height_difference = 6;
+  $dish_type = "spherical";
+  $dish_depth = 1.2;
+  $dish_skew_x = 0;
+  $dish_skew_y = 0;
+  $top_skew = 0;
+  $height_slices = 10;
+  // might wanna change this if you don't minkowski
+  // do you even minkowski bro
+  $corner_radius = 1;
+  $more_side_sculpting_factor = 0.4;
+
+  $side_sculpting = function(progress) (1 - progress) * 4.5;
+  $corner_sculpting = function(progress) pow(progress, 2);
+
+  // this is _incredibly_ intensive
+  /* $rounded_key = true; */
+
+  $top_tilt_y = side_tilt(column);
+  extra_height = $double_sculpted ? extra_side_tilt_height(column) : 0;
+
+  // 5th row is usually unsculpted or the same as the row below it
+  // making a super-sculpted top row (or bottom row!) would be real easy
+  // bottom row would just be 13 tilt and 14.89 total depth
+  // top row would be something new entirely - 18 tilt maybe?
+  if (n <= 1){
+    $total_depth = 10.5 + extra_height;
+    $top_tilt = -1;
+    children();
+  } else if (n == 2) {
+    $total_depth = 8.6 + extra_height;
+    $top_tilt = 3;
+    children();
+  } else if (n == 3) {
+    $total_depth = 7.9 + extra_height;
+    $top_tilt = 8;
+    children();
+  } else if (n == 4){
+    $total_depth = 9.1 + extra_height;
+    $top_tilt = 16;
+    children();
+  } else {
+    $total_depth = 7.9 + extra_height;
+    $top_tilt = 8;
+    children();
+  }
+}

src/key_profiles/g20.scad

@@ -1,3 +1,6 @@
+use <../functions.scad>
+include <../settings.scad>
+
 module g20_row(row=3, column = 0) {
   $bottom_key_width = 18.16;
   $bottom_key_height = 18.16;

src/key_profiles/grid.scad

@@ -1,8 +1,11 @@
+use <../functions.scad>
+include <../settings.scad>
+
 module grid_row(row=3, column = 0) {
   $bottom_key_width = 18.16;
   $bottom_key_height = 18.16;
-  $width_difference = 0.2;
+  $width_difference = 1;
-  $height_difference = 0.2;
+  $height_difference = 1;
   $top_tilt = 0;
   $top_skew = 0;
   $dish_type = "old spherical";
@@ -14,8 +17,8 @@ module grid_row(row=3, column = 0) {
   $hull_shape_type = "linear extrude";
 
 
-  $dish_overdraw_width = -8;
+  $dish_overdraw_width = -6.5;
-  $dish_overdraw_height = -8;
+  $dish_overdraw_height = -6.5;
 
   $minkowski_radius = 0.5;
   //also,
@@ -24,7 +27,7 @@ module grid_row(row=3, column = 0) {
   $top_tilt_y = side_tilt(column);
   extra_height =  $double_sculpted ? extra_side_tilt_height(column) : 0;
 
-  $total_depth = 6 + abs((row-3) * 0.5) + extra_height;
+  $total_depth = 7 + abs((row-3) * 0.5) + extra_height;
 
   if (row == 5 || row == 0) {
     /* $top_tilt =  -18.55; */

src/key_profiles/hex.scad

@@ -0,0 +1,62 @@
+include <../constants.scad>
+// Regular polygon shapes CIRCUMSCRIBE the sphere of diameter $bottom_key_width
+// This is to make tiling them easier, like in the case of hexagonal keycaps etc
+
+// this function doesn't set the key shape, so you can't use it directly without some fiddling
+module hex_row(n=3, column=0) {
+  $bottom_key_width = $unit - 0.5;
+  $bottom_key_height = $unit - 0.5;
+  
+  $width_difference = 0;
+  $height_difference = 0;
+  
+  $dish_type = "spherical";
+  $key_shape_type = "hexagon";
+
+  $stem_inset = -2.5;
+  $stem_throw = 3;
+
+  // $dish_depth = 1;
+
+  $top_skew = 0;
+  $height_slices = 1;
+  $stem_support_type = "disable";
+  
+  $dish_overdraw_width = -8.25;
+  $dish_overdraw_height = -8.25;
+//   $corner_radius = 1;
+
+  // this is _incredibly_ intensive
+  /* $rounded_key = true; */
+
+  $top_tilt_y = side_tilt(column);
+  extra_height = $double_sculpted ? extra_side_tilt_height(column) : 0;
+
+  base_depth = 4;
+  if (n <= 1){
+    $total_depth = base_depth + 2.5 + extra_height;
+    $top_tilt = -13;
+
+    children();
+  } else if (n == 2) {
+    $total_depth = base_depth + 0.5 + extra_height;
+    $top_tilt = -7;
+
+    children();
+  } else if (n == 3) {
+    $total_depth = base_depth + extra_height;
+    $top_tilt = 0;
+
+    children();
+  } else if (n == 4){
+    $total_depth = base_depth + 0.5 + extra_height;
+    $top_tilt = 7;
+
+    children();
+  } else {
+    $total_depth = base_depth + extra_height;
+    $top_tilt = 0;
+
+    children();
+  }
+}

src/key_profiles/hipro.scad

@@ -1,4 +1,6 @@
-// my own measurements
+use <../functions.scad>
+include <../settings.scad>
+
 module hipro_row(row=3, column=0) {
   $key_shape_type = "sculpted_square";
 
@@ -7,15 +9,18 @@ module hipro_row(row=3, column=0) {
 
   $width_difference = ($bottom_key_width - 12.3);
   $height_difference = ($bottom_key_height - 12.65);
-  $dish_type = "spherical";
+  $dish_type = "squared scoop";
   $dish_depth = 0.75;
   $dish_skew_x = 0;
   $dish_skew_y = 0;
   $top_skew = 0;
   $height_slices = 10;
-  // might wanna change this if you don't minkowski
+
-  // do you even minkowski bro
+  $corner_radius = 1;
-  $corner_radius = 0.25;
+  $more_side_sculpting_factor = 0.4;
+
+  $side_sculpting = function(progress) (1 - progress) * 4.5;
+  $corner_sculpting = function(progress) pow(progress, 2);
 
   $top_tilt_y = side_tilt(column);
   extra_height =  $double_sculpted ? extra_side_tilt_height(column) : 0;

src/key_profiles/mt3.scad

@@ -0,0 +1,58 @@
+use <../functions.scad>
+include <../settings.scad>
+
+// This is an imperfect attempt to clone the MT3 profile
+module mt3_row(row=3, column=0, deep_dish=false) {
+  $key_shape_type = "sculpted_square";
+
+  $bottom_key_width = 18.35;
+  $bottom_key_height = 18.6;
+
+  $width_difference = ($bottom_key_width - 13.0);
+  $height_difference = ($bottom_key_height - 13.0);
+  $dish_type = "squared spherical";
+  $dish_depth = deep_dish ? 1.6 : 1.2;
+  $dish_skew_x = 0;
+  $dish_skew_y = 0;
+  $top_skew = 0;
+  $height_slices = 10;
+
+  $corner_radius = 0.0125;
+  $more_side_sculpting_factor = 0.75;
+
+  $side_sculpting = function(progress) (1 - progress) * 4.5;
+  $corner_sculpting = function(progress) pow(progress, 2) * 2;
+
+
+  $top_tilt_y = side_tilt(column);
+  extra_height =  $double_sculpted ? extra_side_tilt_height(column) : 0;
+
+  if (row == 0){
+    // TODO I didn't change these yet
+    $total_depth = 14.7 + extra_height;
+    $top_tilt = -12.5;
+    children();
+  } else if (row == 1) {
+    $total_depth = 13.1 + extra_height;
+    $top_tilt = -6;
+    children();
+  }  else if (row == 2) {
+    $total_depth = 10.7 + extra_height;
+    $top_tilt = -6;
+    children();
+  } else if (row == 3) {
+    $total_depth = 10.7 + extra_height;
+    $top_tilt = 6;
+    children();
+  } else if (row == 4){
+    $total_depth = 11.6 + extra_height;
+    $top_tilt = 12;
+    children();
+  } else if (row >= 5) {
+    $total_depth = 11.6 + extra_height;
+    $top_tilt = 0;
+    children();
+  } else {
+    children();
+  }
+}

src/key_profiles/oem.scad

@@ -1,3 +1,6 @@
+use <../functions.scad>
+include <../settings.scad>
+
 module oem_row(row=3, column = 0) {
   $bottom_key_width = 18.05;
   $bottom_key_height = 18.05;

src/key_profiles/regular_polygon.scad

@@ -1,3 +1,5 @@
+use <../functions.scad>
+include <../settings.scad>
 include <../constants.scad>
 // Regular polygon shapes CIRCUMSCRIBE the sphere of diameter $bottom_key_width
 // This is to make tiling them easier, like in the case of hexagonal keycaps etc

src/key_profiles/sa.scad

@@ -1,3 +1,6 @@
+use <../functions.scad>
+include <../settings.scad>
+
 module sa_row(n=3, column=0) {
   $key_shape_type = "sculpted_square";
   $bottom_key_width = 18.4;
@@ -10,9 +13,12 @@ module sa_row(n=3, column=0) {
   $dish_skew_y = 0;
   $top_skew = 0;
   $height_slices = 10;
-  // might wanna change this if you don't minkowski
+
-  // do you even minkowski bro
+  $corner_radius = 1;
-  $corner_radius = 0.25;
+  $more_side_sculpting_factor = 0.4;
+
+  $side_sculpting = function(progress) (1 - progress) * 4.5;
+  $corner_sculpting = function(progress) pow(progress, 2);
 
   // this is _incredibly_ intensive
   /* $rounded_key = true; */

src/key_profiles/typewriter.scad

@@ -0,0 +1,59 @@
+use <../functions.scad>
+include <../settings.scad>
+include <../constants.scad>
+// Regular polygon shapes CIRCUMSCRIBE the sphere of diameter $bottom_key_width
+// This is to make tiling them easier, like in the case of hexagonal keycaps etc
+
+// this function doesn't set the key shape, so you can't use it directly without some fiddling
+module typewriter_row(n=3, column=0) {
+  $bottom_key_width = $unit - 0.5;
+  $bottom_key_height = $unit - 0.5;
+  $width_difference = 0;
+  $height_difference = 0;
+  $dish_type = "spherical";
+  $key_shape_type = "circular";
+  $inverted_dish = true;
+  $stem_inset = -4.5;
+  $stem_throw = 5;
+  $dish_depth = 4;
+  $dish_skew_x = 0;
+  $dish_skew_y = 0;
+  $top_skew = 0;
+  $height_slices = 1;
+  $stem_support_type = "disable";
+//   $corner_radius = 1;
+
+  // this is _incredibly_ intensive
+  /* $rounded_key = true; */
+
+  $top_tilt_y = side_tilt(column);
+  extra_height = $double_sculpted ? extra_side_tilt_height(column) : 0;
+
+  base_depth = 3.5;
+  if (n <= 1){
+    $total_depth = base_depth + 2.5 + extra_height;
+    $top_tilt = -13;
+
+    children();
+  } else if (n == 2) {
+    $total_depth = base_depth + 0.5 + extra_height;
+    $top_tilt = -7;
+
+    children();
+  } else if (n == 3) {
+    $total_depth = base_depth + extra_height;
+    $top_tilt = 0;
+
+    children();
+  } else if (n == 4){
+    $total_depth = base_depth + 0.5 + extra_height;
+    $top_tilt = 7;
+
+    children();
+  } else {
+    $total_depth = base_depth + extra_height;
+    $top_tilt = 0;
+
+    children();
+  }
+}

src/key_sizes.scad

@@ -17,6 +17,10 @@ module 1_5u() {
   u(1.5) children();
 }
 
+module 1_75u(){
+  u(1.75) children();
+}
+
 module 2u() {
   u(2) children();
 }
@@ -25,6 +29,10 @@ module 2_25u() {
   u(2.25) children();
 }
 
+module 2_50u() {
+  u(2.5) children();
+}
+
 module 2_75u() {
   u(2.75) children();
 }

src/key_transformations.scad

@@ -43,6 +43,12 @@ module rotated() {
   children();
 }
 
+module vertically_stabilized(mm=12, vertical=true, type=undef) {
+  stabilized(mm,vertical,type) {
+    children();
+  }
+}
+
 module stabilized(mm=12, vertical = false, type=undef) {
   if (vertical) {
     $stabilizer_type = (type ? type : ($stabilizer_type ? $stabilizer_type : "costar_stabilizer"));
@@ -85,26 +91,26 @@ module blank() {
   children();
 }
 
-module cherry(slop) {
+module cherry(slop = undef) {
-  $stem_slop = slop ? slop : $stem_slop;
+  $stem_slop = slop != undef ? slop : $stem_slop;
   $stem_type = "cherry";
   children();
 }
 
-module alps(slop) {
+module alps(slop = undef) {
-  $stem_slop = slop ? slop : $stem_slop;
+  $stem_slop = slop != undef ? slop : $stem_slop;
   $stem_type = "alps";
   children();
 }
 
-module rounded_cherry(slop) {
+module rounded_cherry(slop = undef) {
-  $stem_slop = slop ? slop : $stem_slop;
+  $stem_slop = slop != undef ? slop : $stem_slop;
   $stem_type = "rounded_cherry";
   children();
 }
 
-module box_cherry(slop) {
+module box_cherry(slop = undef) {
-  $stem_slop = slop ? slop : $stem_slop;
+  $stem_slop = slop != undef ? slop : $stem_slop;
   $stem_type = "box_cherry";
   children();
 }
@@ -152,15 +158,17 @@ module flat_support() {
   children();
 }
 
-module legend(text, position=[0,0], size=undef) {
+module legend(text, position=[0,0], size=undef, font=undef) {
     font_size = size == undef ? $font_size : size;
-    $legends = [for(L=[$legends, [[text, position, font_size]]], a=L) a];
+    font_face = font == undef ? $font : font;
+    $legends = [for(L=[$legends, [[text, position, font_size, font_face]]], a=L) a];
     children();
 }
 
-module front_legend(text, position=[0,0], size=undef) {
+module front_legend(text, position=[0,0], size=undef, font=undef) {
     font_size = size == undef ? $font_size : size;
-    $front_legends = [for(L=[$front_legends, [[text, position, font_size]]], a=L) a];
+    font_face = font == undef ? $font : font;
+    $front_legends = [for(L=[$front_legends, [[text, position, font_size, font_face]]], a=L) a];
     children();
 }
 
@@ -187,13 +195,68 @@ module upside_down() {
 }
 
 module sideways() {
+  $stem_support_type = "disable";
   $key_shape_type = "flat_sided_square";
   $dish_overdraw_width = abs(extra_keytop_length_for_flat_sides());
-  extra_y_rotation = atan2($width_difference/2,$total_depth);
+  extra_y_rotation = atan2($width_difference/2,$total_depth); // TODO assumes centered top
   translate([0,0,cos(extra_y_rotation) * total_key_width()/2])
   rotate([0,90 + extra_y_rotation ,0]) children();
 }
 
+/* this is hard to explain. we want the angle of the back of the keycap.
+ * first we draw a line at the back of the keycap perpendicular to the ground.
+ * then we extend the line created by the slope of the keytop to that line
+ * the angle of the latter line off the ground is $top_tilt, and
+ * you can create a right triangle with the adjacent edge being $bottom_key_height/2
+ * raised up $total_depth. this gets you x, the component of the extended
+ * keytop slope line, and y, a component of the first perpendicular line.
+ * by a very similar triangle you get r and s, where x is the hypotenuse of that
+ * right triangle and the right angle is again against the first perpendicular line
+ * s is the opposite line in the right triangle required to find q, the angle
+ * of the back. if you subtract r from $total_depth plus y you can now use these
+ * two values in atan to find the angle of interest.
+ */
+module backside() {
+  $stem_support_type = "disable";
+
+  // $key_shape_type = "flat_sided_square";
+
+  a = $bottom_key_height;
+  b = $total_depth;
+  c = top_total_key_height();
+
+  x = (a / 2 - $top_skew) / cos(-$top_tilt) - c / 2;
+  y = sin(-$top_tilt) * (x + c/2);
+  r = sin(-$top_tilt) * x;
+  s = cos(-$top_tilt) * x;
+
+  q = atan2(s, (y + b - r));
+
+  translate([0,0,cos(q) * total_key_height()/2])
+    rotate([-90 - q, 0,0]) children();
+}
+
+// this is just backside with a few signs switched
+module frontside() {
+  $stem_support_type = "disable";
+
+  // $key_shape_type = "flat_sided_square";
+
+  a = $bottom_key_height;
+  b = $total_depth;
+  c = top_total_key_height();
+
+  x = (a / 2 + $top_skew) / cos($top_tilt) - c / 2;
+  y = sin($top_tilt) * (x + c/2);
+  r = sin($top_tilt) * x;
+  s = cos($top_tilt) * x;
+
+  q = atan2(s, (y + b - r));
+
+  translate([0,0,cos(q) * total_key_height()/2])
+  rotate([90 + q, 0,0]) children();
+}
+
 // emulating the % modifier.
 // since we use custom colors, just using the % modifier doesn't work
 module debug() {
@@ -217,3 +280,11 @@ module auto_place() {
     translate_u(x,-y) children(child_index);
   }
 }
+
+// suggested settings for resin prints
+module resin() {
+  $stem_slop = 0;
+  $stem_inner_slop = 0;
+  $stem_support_type = "disable";
+  children();
+}

src/key_types.scad

@@ -1,6 +1,10 @@
+include <functions.scad>
+use <key_sizes.scad>
+use <key_transformations.scad>
+
 module spacebar() {
-  $inverted_dish = true;
+  $inverted_dish = $dish_type != "disable";
-  $dish_type = "sideways cylindrical";
+  $dish_type = $dish_type != "disable" ? "sideways cylindrical" : "disable";
   6_25u() stabilized(mm=50) children();
 }
 
@@ -43,16 +47,19 @@ module iso_enter() {
   $key_length = 1.5;
   $key_height = 2;
 
-  $top_tilt = 0;
+  $dish_offset_x = -(unit_length(1.5) - unit_length(1.25))/2;
+
+  /* $top_tilt = 0; */
   $stem_support_type = "disable";
   $key_shape_type = "iso_enter";
-  /* $hull_shape_type = "linear extrude"; */
+  $hull_shape_type = "skin";
   $linear_extrude_height_adjustment = 19.05 * 0.5;
   // this equals (unit_length(1.5) - unit_length(1.25)) / 2
-  $dish_overdraw_width = 2.38125;
+  /* $dish_overdraw_width = 2.38125; */
 
-
+  render() {
-  stabilized(vertical=true) {
+    stabilized(vertical=true) {
-    children();
+      children();
+    }
   }
 }

src/layouts/60_percent/default.scad

@@ -17,5 +17,5 @@ include <../layout.scad>
 ];
 
 module 60_percent_default(profile) {
-  layout(60_percent_default_layout, profile, 60_percent_legends) children();
+  layout(60_percent_default_layout, profile, 60_percent_legends, row_sculpting_offset=1) children();
 }

src/layouts/hhkb/default.scad

@@ -0,0 +1,21 @@
+include <../layout.scad>
+
+hhkb_layout = [
+  [1,1,1,1,1,1,1,1,1,1,1,1,1,1,1],
+  [1.5,1,1,1,1,1,1,1,1,1,1,1,1,1.5],
+  [1.75,1,1,1,1,1,1,1,1,1,1,1,2.25],
+  [2.25,1,1,1,1,1,1,1,1,1,1,1.75,1],
+  [-1.5,1,1.5,6,1.5,1]
+];
+
+hhkb_legends = [
+  ["Esc", "1", "2", "3", "4", "5", "6", "7", "8", "9", "0", "-", "=", "\\", "`"],
+  ["Tab", "q", "w", "e", "r", "t", "y", "u", "i", "o", "p", "[", "]", "Delete"],
+  ["Ctrl", "a", "s", "d", "f", "g", "h", "j", "k", "l", ";", "'", "Return"],
+  ["Shift", "z", "x", "c", "v", "b", "n", "m", ",", ".", "/", "Shift", "Fn"],
+  ["", "Alt", "Cmd", "", "Cmd", "Alt"],
+];
+
+module hhkb_default(profile) {
+  layout(hhkb_layout, profile, hhkb_legends) children();
+}

src/layouts/layout.scad

@@ -1,3 +1,8 @@
+use <../key_transformations.scad>
+use <../key_profiles.scad>
+use <../key_sizes.scad>
+use <../key_types.scad>
+
 // sums all values, unless a value is negative, in which case it makes it positive
 // dirty hack to allow for large gaps in keysets
 function abs_sum(list, x=0) =

src/libraries/3d_surface.scad

@@ -0,0 +1,79 @@
+// thanks Paul https://github.com/openscad/list-comprehension-demos/
+
+include <../functions.scad>
+
+module 3d_surface(size=$3d_surface_size, step=$3d_surface_step, bottom=-SMALLEST_POSSIBLE){
+  function p(x, y) = [ x, y, max(0,$surface_function(x, y) * $corner_smoothing_surface_function(x,y)) ];
+  function p0(x, y) = [ x, y, bottom ];
+  function rev(b, v) = b ? v : [ v[3], v[2], v[1], v[0] ];
+  function face(x, y) = [ p(x, y + step), p(x + step, y + step), p(x + step, y), p(x + step, y), p(x, y), p(x, y + step) ];
+  function fan(a, i) =
+        a == 0 ? [ [ 0, 0, bottom ], [ i, -size, bottom ], [ i + step, -size, bottom ] ]
+      : a == 1 ? [ [ 0, 0, bottom ], [ i + step,  size, bottom ], [ i,  size, bottom ] ]
+      : a == 2 ? [ [ 0, 0, bottom ], [ -size, i + step, bottom ], [ -size, i, bottom ] ]
+      :          [ [ 0, 0, bottom ], [  size, i, bottom ], [  size, i + step, bottom ] ];
+  function sidex(x, y) = [ p0(x, y), p(x, y), p(x + step, y), p0(x + step, y) ];
+  function sidey(x, y) = [ p0(x, y), p(x, y), p(x, y + step), p0(x, y + step) ];
+
+  points = flatten(concat(
+      // top surface
+      [ for (x = [ -size : step : size - step ], y = [ -size : step : size - step ]) face(x, y) ],
+      // bottom surface as triangle fan
+      [ for (a = [ 0 : 3 ], i = [ -size : step : size - step ]) fan(a, i) ],
+      // sides
+      [ for (x = [ -size : step : size - step ], y = [ -size, size ]) rev(y < 0, sidex(x, y)) ],
+      [ for (y = [ -size : step : size - step ], x = [ -size, size ]) rev(x > 0, sidey(x, y)) ]
+  ));
+
+  tcount = 2 * pow(2 * size / step, 2) + 8 * size / step;
+  scount = 8 * size / step;
+
+  tfaces = [ for (a = [ 0 : 3 : 3 * (tcount - 1) ] ) [ a, a + 1, a + 2 ] ];
+  sfaces = [ for (a = [ 3 * tcount : 4 : 3 * tcount + 4 * scount ] ) [ a, a + 1, a + 2, a + 3 ] ];
+  faces = concat(tfaces, sfaces);
+
+  polyhedron(points, faces, convexity = 8);
+}
+
+module polar_3d_surface(size, step, bottom=-SMALLEST_POSSIBLE){
+  function to_polar(q, size) = q * (90 / size);
+
+  function p(x, y) = [
+    $surface_distribution_function(to_polar(x, size), size),
+    $surface_distribution_function(to_polar(y, size), size),
+    max(0,$surface_function($surface_distribution_function(to_polar(x, size), size), $surface_distribution_function(to_polar(y, size), size)) * $corner_smoothing_surface_function($surface_distribution_function(to_polar(x, size), size), $surface_distribution_function(to_polar(y, size), size)))
+  ];
+  function p0(x, y) = [ x, y, bottom ];
+  function rev(b, v) = b ? v : [ v[3], v[2], v[1], v[0] ];
+  function face(x, y) = [ p(x, y + step), p(x + step, y + step), p(x + step, y), p(x + step, y), p(x, y), p(x, y + step) ];
+  function fan(a, i) =
+        a == 0 ? [ [ 0, 0, bottom ], [ i, -size, bottom ], [ i + step, -size, bottom ] ]
+      : a == 1 ? [ [ 0, 0, bottom ], [ i + step,  size, bottom ], [ i,  size, bottom ] ]
+      : a == 2 ? [ [ 0, 0, bottom ], [ -size, i + step, bottom ], [ -size, i, bottom ] ]
+      :          [ [ 0, 0, bottom ], [  size, i, bottom ], [  size, i + step, bottom ] ];
+  function sidex(x, y) = [ p0(x, y), p(x, y), p(x + step, y), p0(x + step, y) ];
+  function sidey(x, y) = [ p0(x, y), p(x, y), p(x, y + step), p0(x, y + step) ];
+
+  points = flatten(concat(
+      // top surface
+      [ for (x = [ -size : step : size - step ], y = [ -size : step : size - step ]) face(x, y) ],
+      // bottom surface as triangle fan
+      [ for (a = [ 0 : 3 ], i = [ -size : step : size - step ]) fan(a, i) ],
+      // sides
+      [ for (x = [ -size : step : size - step ], y = [ -size, size ]) rev(y < 0, sidex(x, y)) ],
+      [ for (y = [ -size : step : size - step ], x = [ -size, size ]) rev(x > 0, sidey(x, y)) ]
+  ));
+
+  tcount = 2 * pow(2 * size / step, 2) + 8 * size / step;
+  scount = 8 * size / step;
+
+  tfaces = [ for (a = [ 0 : 3 : 3 * (tcount - 1) ] ) [ a, a + 1, a + 2 ] ];
+  sfaces = [ for (a = [ 3 * tcount : 4 : 3 * tcount + 4 * scount ] ) [ a, a + 1, a + 2, a + 3 ] ];
+  faces = concat(tfaces, sfaces);
+
+  polyhedron(points, faces, convexity = 8);
+}
+
+// defaults, overridden in functions.scad
+// $surface_distribution_function = function(dim, size) sin(dim) * size;
+// $surface_function = function(x,y) (sin(acos(x/$3d_surface_size))) * sin(acos(y/$3d_surface_size));

src/libraries/round-anything/polyround.scad

@@ -0,0 +1,687 @@
+// Library: round-anything
+// Version: 1.0
+// Author: IrevDev
+// Contributors: TLC123
+// Copyright: 2020
+// License: MIT
+
+
+function addZcoord(points,displacement)=[for(i=[0:len(points)-1])[points[i].x,points[i].y, displacement]];
+function translate3Dcoords(points,tran=[0,0,0],mult=[1,1,1])=[for(i=[0:len(points)-1])[
+  (points[i].x*mult.x)+tran.x,
+  (points[i].y*mult.y)+tran.y,
+  (points[i].z*mult.z)+tran.z
+]];
+function offsetPolygonPoints(points, offset=0)=
+// Work sthe same as the offset does, except for the fact that instead of a 2d shape
+// It works directly on polygon points
+// It returns the same number of points just offset into or, away from the original shape.
+// points= a series of x,y points[[x1,y1],[x2,y2],...]
+// offset= amount to offset by, negative numbers go inwards into the shape, positive numbers go out
+// return= a series of x,y points[[x1,y1],[x2,y2],...]
+let(
+  isCWorCCW=sign(offset)*CWorCCW(points)*-1,
+  lp=len(points)
+)
+[for(i=[0:lp-1]) parallelFollow([
+  points[listWrap(i-1,lp)],
+  points[i],
+  points[listWrap(i+1,lp)],
+],thick=offset,mode=isCWorCCW)];
+
+function makeCurvedPartOfPolyHedron(radiiPoints,r,fn,minR=0.01)=
+// this is a private function that I'm not expecting library users to use directly
+// radiiPoints= serise of x, y, r points
+// r= radius of curve that will be put on the end of the extrusion
+// fn= amount of subdivisions
+// minR= if one of the points in radiiPoints is less than r, it's likely to converge and form a sharp edge,
+//     the min radius on these converged edges can be controled with minR, though because of legacy reasons it can't be 0, but can be a very small number.
+// return= array of [polyhedronPoints, Polyhedronfaces, theLength of a singe layer in the curve]
+let(
+  lp=len(radiiPoints),
+  radii=[for(i=[0:lp-1])radiiPoints[i].z],
+  isCWorCCWOverall=CWorCCW(radiiPoints),
+  dir=sign(r),
+  absR=abs(r),
+  fractionOffLp=1-1/fn,
+  allPoints=[for(fraction=[0:1/fn:1])
+    let(
+      iterationOffset=dir*sqrt(sq(absR)-sq(fraction*absR))-dir*absR,
+      theOffsetPoints=offsetPolygonPoints(radiiPoints,iterationOffset),
+      polyRoundOffsetPoints=[for(i=[0:lp-1])
+        let(
+          pointsAboutCurrent=[
+            theOffsetPoints[listWrap(i-1,lp)],
+            theOffsetPoints[i],
+            theOffsetPoints[listWrap(i+1,lp)]
+          ],
+          isCWorCCWLocal=CWorCCW(pointsAboutCurrent),
+          isInternalRadius=(isCWorCCWLocal*isCWorCCWOverall)==-1,
+          // the radius names are only true for positive r,
+          // when are r is negative increasingRadius is actually decreasing and vice-vs
+          // increasingRadiusWithPositiveR is just to verbose of a variable name for my liking
+          increasingRadius=max(radii[i]-iterationOffset, minR),
+          decreasingRadius=max(radii[i]+iterationOffset, minR)
+        )
+        [theOffsetPoints[i].x, theOffsetPoints[i].y, isInternalRadius? increasingRadius: decreasingRadius]
+      ],
+      pointsForThisLayer=polyRound(polyRoundOffsetPoints,fn)
+    )
+    addZcoord(pointsForThisLayer,fraction*absR)
+  ],
+  polyhedronPoints=flatternArray(allPoints),
+  allLp=len(allPoints),
+  layerLength=len(allPoints[0]),
+  loopToSecondLastLayer=allLp-2,
+  sideFaces=[for(layerIndex=[0:loopToSecondLastLayer])let(
+    currentLayeroffset=layerIndex*layerLength,
+    nextLayeroffset=(layerIndex+1)*layerLength,
+    layerFaces=[for(subLayerIndex=[0:layerLength-1])
+      [
+        currentLayeroffset+subLayerIndex, currentLayeroffset + listWrap(subLayerIndex+1,layerLength), nextLayeroffset+listWrap(subLayerIndex+1,layerLength), nextLayeroffset+subLayerIndex]
+    ]
+  )layerFaces],
+  polyhedronFaces=flatternArray(sideFaces)
+)
+[polyhedronPoints, polyhedronFaces, layerLength];
+
+function flatternRecursion(array, init=[], currentIndex)=
+// this is a private function, init and currentIndex are for the function's use 
+// only for when it's calling itself, which is why there is a simplified version flatternArray that just calls this one
+// array= array to flattern by one level of nesting
+// init= the array used to cancat with the next call, only for when the function calls itself
+// currentIndex= so the function can keep track of how far it's progressed through the array, only for when it's calling itself
+// returns= flatterned array, by one level of nesting
+let(
+  shouldKickOffRecursion=currentIndex==undef?1:0,
+  isLastIndex=currentIndex+1==len(array)?1:0,
+  flatArray=shouldKickOffRecursion?flatternRecursion(array,[],0):
+    isLastIndex?concat(init,array[currentIndex]):
+    flatternRecursion(array,concat(init,array[currentIndex]),currentIndex+1)
+)
+flatArray;
+
+function flatternArray(array)=
+// public version of flatternRecursion, has simplified params to avoid confusion
+// array= array to be flatterned
+// return= array that been flatterend by one level of nesting
+flatternRecursion(array);
+
+function offsetAllFacesBy(array,offset)=[
+  // polyhedron faces are simply a list of indices to points, if your concat points together than you probably need to offset
+  // your faces array to points to the right place in the new list
+  // array= array of point indicies
+  // offset= number to offset all indecies by
+  // return= array of point indices (i.e. faces) with offset applied
+  for(faceIndex=[0:len(array)-1])[
+    for(pointIndex=[0:len(array[faceIndex])-1])array[faceIndex][pointIndex]+offset
+  ]
+];
+
+function extrudePolygonWithRadius(radiiPoints,h=5,r1=1,r2=1,fn=4)=
+// this basically calls makeCurvedPartOfPolyHedron twice to get the curved section of the final polyhedron
+// and then goes about assmbling them, as the side faces and the top and bottom face caps are missing
+// radiiPoints= series of [x,y,r] points,
+// h= height of the extrude (total including radius sections)
+// r1,r2= define the radius at the top and bottom of the extrud respectively, negative number flange out the extrude
+// fn= number of subdivisions
+// returns= [polyhedronPoints, polyhedronFaces]
+let(
+  // top is the top curved part of the extrude
+  top=makeCurvedPartOfPolyHedron(radiiPoints,r1,fn),
+  topRadiusPoints=translate3Dcoords(top[0],[0,0,h-r1]),
+  singeLayerLength=top[2],
+  topRadiusFaces=top[1],
+  radiusPointsLength=len(topRadiusPoints), // is the same length as bottomRadiusPoints
+  // bottom is the bottom curved part of the extrude
+  bottom=makeCurvedPartOfPolyHedron(radiiPoints,r2,fn),
+  // Z axis needs to be multiplied by -1 to flip it so the radius is going in the right direction [1,1,-1]
+  bottomRadiusPoints=translate3Dcoords(bottom[0],[0,0,abs(r2)],[1,1,-1]),
+  // becaues the points will be all concatenated into the same array, and the bottom points come second, than
+  // the original indices the faces are points towards are wrong and need to have an offset applied to them
+  bottomRadiusFaces=offsetAllFacesBy(bottom[1],radiusPointsLength),
+  // all of the side panel of the extrusion, connecting points from the inner layers of each
+  // of the curved sections
+  sideFaces=[for(i=[0:singeLayerLength-1])[
+    i,
+    listWrap(i+1,singeLayerLength),
+    radiusPointsLength + listWrap(i+1,singeLayerLength),
+    radiusPointsLength + i
+  ]],
+  // both of these caps are simple every point from the last layer of the radius points
+  topCapFace=[for(i=[0:singeLayerLength-1])radiusPointsLength-singeLayerLength+i],
+  bottomCapFace=[for(i=[0:singeLayerLength-1])radiusPointsLength*2-singeLayerLength+i],
+  finalPolyhedronPoints=concat(topRadiusPoints,bottomRadiusPoints),
+  finalPolyhedronFaces=concat(topRadiusFaces,bottomRadiusFaces, sideFaces, [topCapFace], [bottomCapFace])
+)
+[
+  finalPolyhedronPoints,
+  finalPolyhedronFaces
+];
+
+module polyRoundExtrude(radiiPoints,length=5,r1=1,r2=1,fn=10,convexity=10) {
+  polyhedronPointsNFaces=extrudePolygonWithRadius(radiiPoints,length,r1,r2,fn);
+  polyhedron(points=polyhedronPointsNFaces[0], faces=polyhedronPointsNFaces[1], convexity=convexity);
+}
+
+
+// testingInternals();
+module testingInternals(){
+  //example of rounding random points, this has no current use but is a good demonstration
+  random=[for(i=[0:20])[rnd(0,50),rnd(0,50),/*rnd(0,30)*/1000]];
+  R =polyRound(random,7);
+  translate([-25,25,0]){
+    polyline(R);
+  }
+  
+  //example of different modes of the CentreN2PointsArc() function 0=shortest arc, 1=longest arc, 2=CW, 3=CCW
+  p1=[0,5];p2=[10,5];centre=[5,0];
+  translate([60,0,0]){
+    color("green"){
+      polygon(CentreN2PointsArc(p1,p2,centre,0,20));//draws the shortest arc
+    }
+    color("cyan"){
+      polygon(CentreN2PointsArc(p1,p2,centre,1,20));//draws the longest arc
+    }
+  }
+  translate([75,0,0]){
+    color("purple"){
+      polygon(CentreN2PointsArc(p1,p2,centre,2,20));//draws the arc CW (which happens to be the short arc)
+    }
+    color("red"){
+      polygon(CentreN2PointsArc(p2,p1,centre,2,20));//draws the arc CW but p1 and p2 swapped order resulting in the long arc being drawn
+    }
+  }
+  
+  radius=6;
+  radiipoints=[[0,0,0],[10,20,radius],[20,0,0]];
+  tangentsNcen=round3points(radiipoints);
+  translate([10,0,0]){
+    for(i=[0:2]){
+      color("red")translate(getpoints(radiipoints)[i])circle(1);//plots the 3 input points
+      color("cyan")translate(tangentsNcen[i])circle(1);//plots the two tangent poins and the circle centre
+    }
+    translate([tangentsNcen[2][0],tangentsNcen[2][1],-0.2])circle(r=radius,$fn=25);//draws the cirle
+    %polygon(getpoints(radiipoints));//draws a polygon
+  }
+}
+
+function polyRound(radiipoints,fn=5,mode=0)=
+  /*Takes a list of radii points of the format [x,y,radius] and rounds each point
+    with fn resolution
+    mode=0 - automatic radius limiting - DEFAULT
+    mode=1 - Debug, output radius reduction for automatic radius limiting
+    mode=2 - No radius limiting*/
+  let(
+    p=getpoints(radiipoints), //make list of coordinates without radii
+    Lp=len(p),
+    //remove the middle point of any three colinear points, otherwise adding a radius to the middle of a straigh line causes problems
+    radiiPointsWithoutTrippleColinear=[
+      for(i=[0:len(p)-1]) if(
+        // keep point if it isn't colinear or if the radius is 0
+        !isColinear(
+          p[listWrap(i-1,Lp)],
+          p[listWrap(i+0,Lp)],
+          p[listWrap(i+1,Lp)]
+        )||
+        p[listWrap(i+0,Lp)].z!=0
+      ) radiipoints[listWrap(i+0,Lp)] 
+    ],
+    newrp2=processRadiiPoints(radiiPointsWithoutTrippleColinear),
+    plusMinusPointRange=mode==2?1:2,
+    temp=[
+      for(i=[0:len(newrp2)-1]) //for each point in the radii array
+      let(
+        thepoints=[for(j=[-plusMinusPointRange:plusMinusPointRange])newrp2[listWrap(i+j,len(newrp2))]],//collect 5 radii points
+        temp2=mode==2?round3points(thepoints,fn):round5points(thepoints,fn,mode)
+      )
+      mode==1?temp2:newrp2[i][2]==0?
+        [[newrp2[i][0],newrp2[i][1]]]: //return the original point if the radius is 0
+        CentreN2PointsArc(temp2[0],temp2[1],temp2[2],0,fn) //return the arc if everything is normal
+    ]
+  )
+  [for (a = temp) for (b = a) b];//flattern and return the array
+
+function round5points(rp,fn,debug=0)=
+	rp[2][2]==0&&debug==0?[[rp[2][0],rp[2][1]]]://return the middle point if the radius is 0
+	rp[2][2]==0&&debug==1?0://if debug is enabled and the radius is 0 return 0
+	let(
+    p=getpoints(rp), //get list of points
+    r=[for(i=[1:3]) abs(rp[i][2])],//get the centre 3 radii
+    //start by determining what the radius should be at point 3
+    //find angles at points 2 , 3 and 4
+    a2=cosineRuleAngle(p[0],p[1],p[2]),
+    a3=cosineRuleAngle(p[1],p[2],p[3]),
+    a4=cosineRuleAngle(p[2],p[3],p[4]),
+    //find the distance between points 2&3 and between points 3&4
+    d23=pointDist(p[1],p[2]),
+    d34=pointDist(p[2],p[3]),
+    //find the radius factors
+    F23=(d23*tan(a2/2)*tan(a3/2))/(r[0]*tan(a3/2)+r[1]*tan(a2/2)),
+    F34=(d34*tan(a3/2)*tan(a4/2))/(r[1]*tan(a4/2)+r[2]*tan(a3/2)),
+    newR=min(r[1],F23*r[1],F34*r[1]),//use the smallest radius
+    //now that the radius has been determined, find tangent points and circle centre
+    tangD=newR/tan(a3/2),//distance to the tangent point from p3
+      circD=newR/sin(a3/2),//distance to the circle centre from p3
+    //find the angle from the p3
+    an23=getAngle(p[1],p[2]),//angle from point 3 to 2
+    an34=getAngle(p[3],p[2]),//angle from point 3 to 4
+    //find tangent points
+    t23=[p[2][0]-cos(an23)*tangD,p[2][1]-sin(an23)*tangD],//tangent point between points 2&3
+    t34=[p[2][0]-cos(an34)*tangD,p[2][1]-sin(an34)*tangD],//tangent point between points 3&4
+    //find circle centre
+    tmid=getMidpoint(t23,t34),//midpoint between the two tangent points
+    anCen=getAngle(tmid,p[2]),//angle from point 3 to circle centre
+    cen=[p[2][0]-cos(anCen)*circD,p[2][1]-sin(anCen)*circD]
+  )
+    //circle center by offseting from point 3
+    //determine the direction of rotation
+	debug==1?//if debug in disabled return arc (default)
+    (newR-r[1]):
+	[t23,t34,cen];
+
+function round3points(rp,fn)=
+  rp[1][2]==0?[[rp[1][0],rp[1][1]]]://return the middle point if the radius is 0
+	let(
+    p=getpoints(rp), //get list of points
+	  r=rp[1][2],//get the centre 3 radii
+    ang=cosineRuleAngle(p[0],p[1],p[2]),//angle between the lines
+    //now that the radius has been determined, find tangent points and circle centre
+	  tangD=r/tan(ang/2),//distance to the tangent point from p2
+    circD=r/sin(ang/2),//distance to the circle centre from p2
+    //find the angles from the p2 with respect to the postitive x axis
+    angleFromPoint1ToPoint2=getAngle(p[0],p[1]),
+    angleFromPoint2ToPoint3=getAngle(p[2],p[1]),
+    //find tangent points
+    t12=[p[1][0]-cos(angleFromPoint1ToPoint2)*tangD,p[1][1]-sin(angleFromPoint1ToPoint2)*tangD],//tangent point between points 1&2
+    t23=[p[1][0]-cos(angleFromPoint2ToPoint3)*tangD,p[1][1]-sin(angleFromPoint2ToPoint3)*tangD],//tangent point between points 2&3
+    //find circle centre
+    tmid=getMidpoint(t12,t23),//midpoint between the two tangent points
+    angCen=getAngle(tmid,p[1]),//angle from point 2 to circle centre
+    cen=[p[1][0]-cos(angCen)*circD,p[1][1]-sin(angCen)*circD] //circle center by offseting from point 2 
+  )
+	[t12,t23,cen];
+
+function parallelFollow(rp,thick=4,minR=1,mode=1)=
+    //rp[1][2]==0?[rp[1][0],rp[1][1],0]://return the middle point if the radius is 0
+    thick==0?[rp[1][0],rp[1][1],0]://return the middle point if the radius is 0
+	let(
+    p=getpoints(rp), //get list of points
+	  r=thick,//get the centre 3 radii
+    ang=cosineRuleAngle(p[0],p[1],p[2]),//angle between the lines
+    //now that the radius has been determined, find tangent points and circle centre
+    tangD=r/tan(ang/2),//distance to the tangent point from p2
+  	sgn=CWorCCW(rp),//rotation of the three points cw or ccw?let(sgn=mode==0?1:-1)
+    circD=mode*sgn*r/sin(ang/2),//distance to the circle centre from p2
+    //find the angles from the p2 with respect to the postitive x axis
+    angleFromPoint1ToPoint2=getAngle(p[0],p[1]),
+    angleFromPoint2ToPoint3=getAngle(p[2],p[1]),
+    //find tangent points
+    t12=[p[1][0]-cos(angleFromPoint1ToPoint2)*tangD,p[1][1]-sin(angleFromPoint1ToPoint2)*tangD],//tangent point between points 1&2
+	  t23=[p[1][0]-cos(angleFromPoint2ToPoint3)*tangD,p[1][1]-sin(angleFromPoint2ToPoint3)*tangD],//tangent point between points 2&3
+    //find circle centre
+    tmid=getMidpoint(t12,t23),//midpoint between the two tangent points
+    angCen=getAngle(tmid,p[1]),//angle from point 2 to circle centre
+    cen=[p[1][0]-cos(angCen)*circD,p[1][1]-sin(angCen)*circD],//circle center by offseting from point 2 
+    outR=max(minR,rp[1][2]-thick*sgn*mode) //ensures radii are never too small.
+  )
+	concat(cen,outR);
+
+function findPoint(ang1,refpoint1,ang2,refpoint2,r=0)=
+  let(
+    m1=tan(ang1),
+    c1=refpoint1.y-m1*refpoint1.x,
+	  m2=tan(ang2),
+    c2=refpoint2.y-m2*refpoint2.x,
+    outputX=(c2-c1)/(m1-m2),
+    outputY=m1*outputX+c1
+  )
+	[outputX,outputY,r];
+
+function beamChain(radiiPoints,offset1=0,offset2,mode=0,minR=0,startAngle,endAngle)= 
+  /*This function takes a series of radii points and plots points to run along side at a consistant distance, think of it as offset but for line instead of a polygon
+  radiiPoints=radii points,
+  offset1 & offset2= The two offsets that give the beam it's thickness. When using with mode=2 only offset1 is needed as there is no return path for the polygon
+  minR=min radius, if all of your radii are set properly within the radii points this value can be ignored
+  startAngle & endAngle= Angle at each end of the beam, different mode determine if this angle is relative to the ending legs of the beam or absolute.
+  mode=1 - include endpoints startAngle&2 are relative to the angle of the last two points and equal 90deg if not defined
+  mode=2 - Only the forward path is defined, useful for combining the beam with other radii points, see examples for a use-case.
+  mode=3 - include endpoints startAngle&2 are absolute from the x axis and are 0 if not defined
+  negative radiuses only allowed for the first and last radii points
+  
+  As it stands this function could probably be tidied a lot, but it works, I'll tidy later*/
+  let(
+    offset2undef=offset2==undef?1:0,
+    offset2=offset2undef==1?0:offset2,
+    CWorCCW1=sign(offset1)*CWorCCW(radiiPoints),
+    CWorCCW2=sign(offset2)*CWorCCW(radiiPoints),
+    offset1=abs(offset1),
+    offset2b=abs(offset2),
+    Lrp3=len(radiiPoints)-3,
+    Lrp=len(radiiPoints),
+    startAngle=mode==0&&startAngle==undef?
+      getAngle(radiiPoints[0],radiiPoints[1])+90:
+      mode==2&&startAngle==undef?
+      0:
+      mode==0?
+      getAngle(radiiPoints[0],radiiPoints[1])+startAngle:
+      startAngle,
+    endAngle=mode==0&&endAngle==undef?
+            getAngle(radiiPoints[Lrp-1],radiiPoints[Lrp-2])+90:
+        mode==2&&endAngle==undef?
+            0:
+        mode==0?
+            getAngle(radiiPoints[Lrp-1],radiiPoints[Lrp-2])+endAngle:
+            endAngle,
+    OffLn1=[for(i=[0:Lrp3]) offset1==0?radiiPoints[i+1]:parallelFollow([radiiPoints[i],radiiPoints[i+1],radiiPoints[i+2]],offset1,minR,mode=CWorCCW1)],
+    OffLn2=[for(i=[0:Lrp3]) offset2==0?radiiPoints[i+1]:parallelFollow([radiiPoints[i],radiiPoints[i+1],radiiPoints[i+2]],offset2b,minR,mode=CWorCCW2)],  
+    Rp1=abs(radiiPoints[0].z),
+    Rp2=abs(radiiPoints[Lrp-1].z),
+    endP1a=findPoint(getAngle(radiiPoints[0],radiiPoints[1]),         OffLn1[0],              startAngle,radiiPoints[0],     Rp1),
+    endP1b=findPoint(getAngle(radiiPoints[Lrp-1],radiiPoints[Lrp-2]), OffLn1[len(OffLn1)-1],  endAngle,radiiPoints[Lrp-1], Rp2),
+    endP2a=findPoint(getAngle(radiiPoints[0],radiiPoints[1]),         OffLn2[0],              startAngle,radiiPoints[0],     Rp1),
+    endP2b=findPoint(getAngle(radiiPoints[Lrp-1],radiiPoints[Lrp-2]), OffLn2[len(OffLn1)-1],  endAngle,radiiPoints[Lrp-1], Rp2),
+    absEnda=getAngle(endP1a,endP2a),
+    absEndb=getAngle(endP1b,endP2b),
+    negRP1a=[cos(absEnda)*radiiPoints[0].z*10+endP1a.x,        sin(absEnda)*radiiPoints[0].z*10+endP1a.y,       0.0],
+    negRP2a=[cos(absEnda)*-radiiPoints[0].z*10+endP2a.x,       sin(absEnda)*-radiiPoints[0].z*10+endP2a.y,      0.0],
+    negRP1b=[cos(absEndb)*radiiPoints[Lrp-1].z*10+endP1b.x,    sin(absEndb)*radiiPoints[Lrp-1].z*10+endP1b.y,   0.0],
+    negRP2b=[cos(absEndb)*-radiiPoints[Lrp-1].z*10+endP2b.x,   sin(absEndb)*-radiiPoints[Lrp-1].z*10+endP2b.y,  0.0],
+    OffLn1b=(mode==0||mode==2)&&radiiPoints[0].z<0&&radiiPoints[Lrp-1].z<0?
+        concat([negRP1a],[endP1a],OffLn1,[endP1b],[negRP1b])
+      :(mode==0||mode==2)&&radiiPoints[0].z<0?
+        concat([negRP1a],[endP1a],OffLn1,[endP1b])
+      :(mode==0||mode==2)&&radiiPoints[Lrp-1].z<0?
+        concat([endP1a],OffLn1,[endP1b],[negRP1b])
+      :mode==0||mode==2?
+        concat([endP1a],OffLn1,[endP1b])
+      :
+        OffLn1,
+    OffLn2b=(mode==0||mode==2)&&radiiPoints[0].z<0&&radiiPoints[Lrp-1].z<0?
+        concat([negRP2a],[endP2a],OffLn2,[endP2b],[negRP2b])
+      :(mode==0||mode==2)&&radiiPoints[0].z<0?
+        concat([negRP2a],[endP2a],OffLn2,[endP2b])
+      :(mode==0||mode==2)&&radiiPoints[Lrp-1].z<0?
+        concat([endP2a],OffLn2,[endP2b],[negRP2b])
+      :mode==0||mode==2?
+        concat([endP2a],OffLn2,[endP2b])
+      :
+        OffLn2
+    )//end of let()
+  offset2undef==1?OffLn1b:concat(OffLn2b,revList(OffLn1b));
+    
+function revList(list)=//reverse list
+  let(Llist=len(list)-1)
+  [for(i=[0:Llist]) list[Llist-i]];
+
+function CWorCCW(p)=
+	let(
+    Lp=len(p),
+	  e=[for(i=[0:Lp-1]) 
+      (p[listWrap(i+0,Lp)].x-p[listWrap(i+1,Lp)].x)*(p[listWrap(i+0,Lp)].y+p[listWrap(i+1,Lp)].y)
+    ]
+  )  
+  sign(sum(e));
+
+function CentreN2PointsArc(p1,p2,cen,mode=0,fn)=
+  /* This function plots an arc from p1 to p2 with fn increments using the cen as the centre of the arc.
+  the mode determines how the arc is plotted
+  mode==0, shortest arc possible 
+  mode==1, longest arc possible
+  mode==2, plotted clockwise
+  mode==3, plotted counter clockwise
+  */
+	let(
+    isCWorCCW=CWorCCW([cen,p1,p2]),//determine the direction of rotation
+    //determine the arc angle depending on the mode
+    p1p2Angle=cosineRuleAngle(p2,cen,p1),
+    arcAngle=
+      mode==0?p1p2Angle:
+      mode==1?p1p2Angle-360:
+      mode==2&&isCWorCCW==-1?p1p2Angle:
+      mode==2&&isCWorCCW== 1?p1p2Angle-360:
+      mode==3&&isCWorCCW== 1?p1p2Angle:
+      mode==3&&isCWorCCW==-1?p1p2Angle-360:
+      cosineRuleAngle(p2,cen,p1),
+    r=pointDist(p1,cen),//determine the radius
+	  p1Angle=getAngle(cen,p1) //angle of line 1
+  )
+  [for(i=[0:fn])
+  let(angleIncrement=(arcAngle/fn)*i*isCWorCCW)
+  [cos(p1Angle+angleIncrement)*r+cen.x,sin(p1Angle+angleIncrement)*r+cen.y]];
+
+function translateRadiiPoints(radiiPoints,tran=[0,0],rot=0)=
+	[for(i=radiiPoints) 
+		let(
+      a=getAngle([0,0],[i.x,i.y]),//get the angle of the this point
+		  h=pointDist([0,0],[i.x,i.y]) //get the hypotenuse/radius
+    )
+		[h*cos(a+rot)+tran.x,h*sin(a+rot)+tran.y,i.z]//calculate the point's new position
+	];
+
+module round2d(OR=3,IR=1){
+  offset(OR,$fn=100){
+    offset(-IR-OR,$fn=100){
+      offset(IR,$fn=100){
+        children();
+      }
+    }
+  }
+}
+
+module shell2d(offset1,offset2=0,minOR=0,minIR=0){
+	difference(){
+		round2d(minOR,minIR){
+      offset(max(offset1,offset2)){
+        children(0);//original 1st child forms the outside of the shell
+      }
+    }
+		round2d(minIR,minOR){
+      difference(){//round the inside cutout
+        offset(min(offset1,offset2)){
+          children(0);//shrink the 1st child to form the inside of the shell 
+        }
+        if($children>1){
+          for(i=[1:$children-1]){
+            children(i);//second child and onwards is used to add material to inside of the shell
+          }
+        }
+      }
+		}
+	}
+}
+
+module internalSq(size,r,center=0){
+    tran=center==1?[0,0]:size/2;
+    translate(tran){
+      square(size,true);
+      offs=sin(45)*r;
+      for(i=[-1,1],j=[-1,1]){
+        translate([(size.x/2-offs)*i,(size.y/2-offs)*j])circle(r);
+      }
+    }
+}
+
+module extrudeWithRadius(length,r1=0,r2=0,fn=30){
+  n1=sign(r1);n2=sign(r2);
+  r1=abs(r1);r2=abs(r2);
+  translate([0,0,r1]){
+    linear_extrude(length-r1-r2){
+      children();
+    }
+  }
+  for(i=[0:fn-1]){
+    translate([0,0,i/fn*r1]){
+      linear_extrude(r1/fn+0.01){
+        offset(n1*sqrt(sq(r1)-sq(r1-i/fn*r1))-n1*r1){
+          children();
+        }
+      }
+    }
+    translate([0,0,length-r2+i/fn*r2]){
+      linear_extrude(r2/fn+0.01){
+        offset(n2*sqrt(sq(r2)-sq(i/fn*r2))-n2*r2){
+          children();
+        }
+      }
+    }
+  }
+}
+
+function mirrorPoints(radiiPoints,rot=0,endAttenuation=[0,0])= //mirrors a list of points about Y, ignoring the first and last points and returning them in reverse order for use with polygon or polyRound
+  let(
+    a=translateRadiiPoints(radiiPoints,[0,0],-rot),
+    temp3=[for(i=[0+endAttenuation[0]:len(a)-1-endAttenuation[1]])
+      [a[i][0],-a[i][1],a[i][2]]
+    ],
+    temp=translateRadiiPoints(temp3,[0,0],rot),
+    temp2=revList(temp3)
+  )    
+  concat(radiiPoints,temp2);
+
+function processRadiiPoints(rp)=
+  [for(i=[0:len(rp)-1])
+    processRadiiPoints2(rp,i)
+  ];
+
+function processRadiiPoints2(list,end=0,idx=0,result=0)=
+  idx>=end+1?result:
+  processRadiiPoints2(list,end,idx+1,relationalRadiiPoints(result,list[idx]));
+
+function cosineRuleBside(a,c,C)=c*cos(C)-sqrt(sq(a)+sq(c)+sq(cos(C))-sq(c));
+
+function absArelR(po,pn)=
+  let(
+    th2=atan(po[1]/po[0]),
+    r2=sqrt(sq(po[0])+sq(po[1])),
+    r3=cosineRuleBside(r2,pn[1],th2-pn[0])
+  )
+  [cos(pn[0])*r3,sin(pn[0])*r3,pn[2]];
+
+function relationalRadiiPoints(po,pi)=
+  let(
+    p0=pi[0],
+    p1=pi[1],
+    p2=pi[2],
+    pv0=pi[3][0],
+    pv1=pi[3][1],
+    pt0=pi[3][2],
+    pt1=pi[3][3],
+    pn=
+      (pv0=="y"&&pv1=="x")||(pv0=="r"&&pv1=="a")||(pv0=="y"&&pv1=="a")||(pv0=="x"&&pv1=="a")||(pv0=="y"&&pv1=="r")||(pv0=="x"&&pv1=="r")?
+        [p1,p0,p2,concat(pv1,pv0,pt1,pt0)]:
+        [p0,p1,p2,concat(pv0,pv1,pt0,pt1)],
+    n0=pn[0],
+    n1=pn[1],
+    n2=pn[2],
+    nv0=pn[3][0],
+    nv1=pn[3][1],
+    nt0=pn[3][2],
+    nt1=pn[3][3],
+    temp=
+      pn[0]=="l"?
+        [po[0],pn[1],pn[2]]
+      :pn[1]=="l"?
+        [pn[0],po[1],pn[2]]
+      :nv0==undef?
+        [pn[0],pn[1],pn[2]]//abs x, abs y as default when undefined
+      :nv0=="a"?
+        nv1=="r"?
+          nt0=="a"?
+            nt1=="a"||nt1==undef?
+              [cos(n0)*n1,sin(n0)*n1,n2]//abs angle, abs radius
+            :absArelR(po,pn)//abs angle rel radius
+          :nt1=="r"||nt1==undef?
+            [po[0]+cos(pn[0])*pn[1],po[1]+sin(pn[0])*pn[1],pn[2]]//rel angle, rel radius 
+          :[pn[0],pn[1],pn[2]]//rel angle, abs radius
+        :nv1=="x"?
+          nt0=="a"?
+            nt1=="a"||nt1==undef?
+              [pn[1],pn[1]*tan(pn[0]),pn[2]]//abs angle, abs x
+            :[po[0]+pn[1],(po[0]+pn[1])*tan(pn[0]),pn[2]]//abs angle rel x
+            :nt1=="r"||nt1==undef?
+              [po[0]+pn[1],po[1]+pn[1]*tan(pn[0]),pn[2]]//rel angle, rel x 
+            :[pn[1],po[1]+(pn[1]-po[0])*tan(pn[0]),pn[2]]//rel angle, abs x
+          :nt0=="a"?
+            nt1=="a"||nt1==undef?
+              [pn[1]/tan(pn[0]),pn[1],pn[2]]//abs angle, abs y
+            :[(po[1]+pn[1])/tan(pn[0]),po[1]+pn[1],pn[2]]//abs angle rel y
+          :nt1=="r"||nt1==undef?
+            [po[0]+(pn[1]-po[0])/tan(90-pn[0]),po[1]+pn[1],pn[2]]//rel angle, rel y 
+          :[po[0]+(pn[1]-po[1])/tan(pn[0]),pn[1],pn[2]]//rel angle, abs y
+      :nv0=="r"?
+        nv1=="x"?
+          nt0=="a"?
+            nt1=="a"||nt1==undef?
+              [pn[1],sign(pn[0])*sqrt(sq(pn[0])-sq(pn[1])),pn[2]]//abs radius, abs x
+            :[po[0]+pn[1],sign(pn[0])*sqrt(sq(pn[0])-sq(po[0]+pn[1])),pn[2]]//abs radius rel x
+          :nt1=="r"||nt1==undef?
+            [po[0]+pn[1],po[1]+sign(pn[0])*sqrt(sq(pn[0])-sq(pn[1])),pn[2]]//rel radius, rel x 
+          :[pn[1],po[1]+sign(pn[0])*sqrt(sq(pn[0])-sq(pn[1]-po[0])),pn[2]]//rel radius, abs x
+        :nt0=="a"?
+          nt1=="a"||nt1==undef?
+            [sign(pn[0])*sqrt(sq(pn[0])-sq(pn[1])),pn[1],pn[2]]//abs radius, abs y
+          :[sign(pn[0])*sqrt(sq(pn[0])-sq(po[1]+pn[1])),po[1]+pn[1],pn[2]]//abs radius rel y
+        :nt1=="r"||nt1==undef?
+          [po[0]+sign(pn[0])*sqrt(sq(pn[0])-sq(pn[1])),po[1]+pn[1],pn[2]]//rel radius, rel y 
+        :[po[0]+sign(pn[0])*sqrt(sq(pn[0])-sq(pn[1]-po[1])),pn[1],pn[2]]//rel radius, abs y
+      :nt0=="a"?
+        nt1=="a"||nt1==undef?
+          [pn[0],pn[1],pn[2]]//abs x, abs y
+        :[pn[0],po[1]+pn[1],pn[2]]//abs x rel y
+      :nt1=="r"||nt1==undef?
+        [po[0]+pn[0],po[1]+pn[1],pn[2]]//rel x, rel y 
+      :[po[0]+pn[0],pn[1],pn[2]]//rel x, abs y
+  )
+  temp;
+
+function invtan(run,rise)=
+  let(a=abs(atan(rise/run)))
+  rise==0&&run>0?
+    0:rise>0&&run>0?
+    a:rise>0&&run==0?
+    90:rise>0&&run<0?
+    180-a:rise==0&&run<0?
+    180:rise<0&&run<0?
+    a+180:rise<0&&run==0?
+    270:rise<0&&run>0?
+    360-a:"error";
+
+function cosineRuleAngle(p1,p2,p3)=
+  let(
+    p12=abs(pointDist(p1,p2)),
+    p13=abs(pointDist(p1,p3)),
+    p23=abs(pointDist(p2,p3))
+  )
+  acos((sq(p23)+sq(p12)-sq(p13))/(2*p23*p12));
+
+function sum(list, idx = 0, result = 0) = 
+	idx >= len(list) ? result : sum(list, idx + 1, result + list[idx]);
+
+function sq(x)=x*x;
+function getGradient(p1,p2)=(p2.y-p1.y)/(p2.x-p1.x);
+function getAngle(p1,p2)=p1==p2?0:invtan(p2[0]-p1[0],p2[1]-p1[1]);
+function getMidpoint(p1,p2)=[(p1[0]+p2[0])/2,(p1[1]+p2[1])/2]; //returns the midpoint of two points
+function pointDist(p1,p2)=sqrt(abs(sq(p1[0]-p2[0])+sq(p1[1]-p2[1]))); //returns the distance between two points
+function isColinear(p1,p2,p3)=getGradient(p1,p2)==getGradient(p2,p3)?1:0;//return 1 if 3 points are colinear
+module polyline(p, width=0.3) {
+  for(i=[0:max(0,len(p)-1)]){
+    color([i*1/len(p),1-i*1/len(p),0,0.5])line(p[i],p[listWrap(i+1,len(p) )],width);
+  }
+} // polyline plotter
+module line(p1, p2 ,width=0.3) { // single line plotter
+  hull() {
+    translate(p1){
+      circle(width);
+    }
+    translate(p2){
+      circle(width);
+    }
+  }
+}
+
+function getpoints(p)=[for(i=[0:len(p)-1])[p[i].x,p[i].y]];// gets [x,y]list of[x,y,r]list
+function listWrap(x,x_max=1,x_min=0) = (((x - x_min) % (x_max - x_min)) + (x_max - x_min)) % (x_max - x_min) + x_min; // wraps numbers inside boundaries
+function rnd(a = 1, b = 0, s = []) = 
+  s == [] ? 
+    (rands(min(a, b), max(   a, b), 1)[0]):(rands(min(a, b), max(a, b), 1, s)[0]); // nice rands wrapper 

src/libraries/rounded_rectangle_profile.scad

@@ -1,35 +0,0 @@
-function sign_x(i,n) =
-	i < n/4 || i > n*3/4  ?  1 :
-	i > n/4 && i < n*3/4  ? -1 :
-	0;
-
-function sign_y(i,n) =
-	i > 0 && i < n/2  ?  1 :
-	i > n/2 ? -1 :
-	0;
-
-
-function rectangle_profile(size=[1,1],fn=32) = [
-	for (index = [0:fn-1])
-		let(a = index/fn*360)
-			sign_x(index, fn) * [size[0]/2,0]
-			+ sign_y(index, fn) * [0,size[1]/2]
-];
-
-function rounded_rectangle_profile(size=[1,1],r=1,fn=32) = [
-	let(max_fn = max(fn,8))
-		for (index = [0:max_fn-1])
-			let(a = index/max_fn*360)
-				r * [cos(a), sin(a)]
-				+ sign_x(index, max_fn) * [size[0]/2-r,0]
-				+ sign_y(index, max_fn) * [0,size[1]/2-r]
-];
-
-function double_rounded_rectangle_profile(size=[1,1], r=1, fn=32) = [
-	let(max_fn = max(fn,8))
-		for (index = [0:max_fn-1])
-			let(a = index/max_fn*360)
-				r * [cos(a), sin(a)]
-				+ sign_x(index, max_fn) * [size[0]/2-r,0]
-				+ sign_y(index, max_fn) * [0,size[1]/2-r]
-];

src/settings.scad

@@ -76,12 +76,10 @@ $rounded_cherry_stem_d = 5.5;
 // Inset stem requires support but is more accurate in some profiles
 // can be negative to make outset stems!
 $stem_inset = 0;
-// How many degrees to rotate the stems. useful for sideways keycaps, maybe
+// How many degrees to rotate the stems. useful for sideways keycaps
 $stem_rotation = 0;
-
+// How many degrees to rotate the keycap, but _not_ inside features (the stem). 
-// enable to have stem support extend past the keycap bottom, to (hopefully) the next
+$keycap_rotation = 0;
-// keycap. only works on tines right now
-$extra_long_stem_support = false;
 
 /* [Shape] */
 
@@ -103,7 +101,11 @@ $dish_depth = 1;
 $dish_skew_x = 0;
 // How skewed in the y direction (height) the dish is
 $dish_skew_y = 0;
-// If you need the dish to extend further, you can 'overdraw' the rectangle it will hit
+
+
+$dish_offset_x = 0;
+
+// If you need the dish to extend further, you can 'overdraw' the rectangle it will hit. this was mostly for iso enter and should be deprecated
 $dish_overdraw_width = 0;
 // Same as width but for height
 $dish_overdraw_height = 0;
@@ -190,11 +192,60 @@ $warning_color = [1,0,0, 0.15];
 $minkowski_facets = 30;
 $shape_facets =30;
 
-// 3d surface settings
+
-// unused for now
-$3d_surface_size = 100;
-// resolution in each axis. 10 = 10 divisions per x/y = 100 points total
-$3d_surface_step = 5;
 
 // "flat" / "dished" / "disable"
 $inner_shape_type = "flat";
+
+// default side_sculpting function, linear
+$side_sculpting = function(progress) 0;
+$corner_sculpting = function(progress) 0;
+
+// you probably shouldn't touch this, it's internal to sculpted_square
+// modify side sculpting with the $side_sculpting function in the key profile files
+$more_side_sculpting_factor = 0;
+
+// 3d surface functions (still in beta)
+
+// 3d surface settings
+// unused for now
+$3d_surface_size = 1;
+// 3d surface point resolution. $3d_surface_size / $3d_surface_step = steps per x / y
+$3d_surface_step = 1/20;
+
+// monotonically increasing function that distributes the points of the surface mesh
+// only for polar_3d_surface right now
+// if it's linear it's a grid. sin(dim) * size concentrates detail around the edges
+sinusoidal_surface_distribution = function(dim,size) sin(dim) * size;
+linear_surface_distribution = function(dim,size) dim;
+
+$surface_distribution_function = sinusoidal_surface_distribution;
+
+// the function that actually determines what the surface is.
+// feel free to override, the last one wins
+
+// debug
+// $surface_function = function(x,y) 1;
+cylindrical_surface = function(x,y) (sin(acos(x/$3d_surface_size)));
+spherical_surface = function(x,y) (1 - (x/$3d_surface_size)^2)^0.5 * (1 - (y/$3d_surface_size)^2)^0.5;
+// looks a lot like mt3
+quartic_surface = function(x,y) (1 - (x/$3d_surface_size)^4)^0.5 * (1 - (y/$3d_surface_size)^4)^0.5;
+ripple_surface = function(x,y) cos((x^2+y^2)^0.5 * 50)/4 + 0.75; 
+rosenbrocks_banana_surface = function(x,y) (pow(1-(x/$3d_surface_size))^2 + 100 * pow((y/$3d_surface_size)-(x/$3d_surface_size)^2)^2)/200 + 0.1;
+spike_surface = function(x,y) 1/(((x/$3d_surface_size)^2+(y/$3d_surface_size)^2)^0.5) + .01;
+random_surface = function(x,y) sin(rands(0,90,1,x+y)[0]);
+bumps_surface = function(x,y) sin(20*x)*cos(20*y)/3+1;
+
+$surface_function = bumps_surface; // bumps_surface;
+
+// can be used to smooth the corners of the 3d surface function, to make the dishes add / subtract less height. can really do anything it's just multiplying, but that's what I use it for
+$corner_smoothing_surface_function = function(x,y) 1;
+// $corner_smoothing_surface_function = function(x,y) (1 - pow(abs(x), 5)/$3d_surface_size) * (1 - pow(abs(y),5)/$3d_surface_size);
+
+// ripples
+/* 
+// Rosenbrock's banana
+/* $
+// y=x revolved around the y axis
+/* $surface_function =  */
+/* $surface_function =  */

src/shapes.scad

@@ -28,6 +28,8 @@ module key_shape(size, delta, progress = 0) {
     regular_polygon_shape(size, delta, progress);
   } else if ($key_shape_type == "octagon") {
     regular_polygon_shape(size, delta, progress, sides=8);
+  } else if ($key_shape_type == "circular") {
+    regular_polygon_shape(size, delta, progress, sides=36);
   } else {
     echo("Warning: unsupported $key_shape_type");
   }

src/shapes/ISO_enter.scad

@@ -1,6 +1,9 @@
-// corollary is rounded_square
+include <../functions.scad>
-// NOT 3D
+include <../libraries/round-anything/polyround.scad>
-function unit_length(length) = unit * (length - 1) + 18.16;
+
+width_ratio = unit_length(1.25) / unit_length(1.5);
+height_ratio = unit_length(1) / unit_length(2);
+
 
 
 module ISO_enter_shape(size, delta, progress){
@@ -14,9 +17,6 @@ module ISO_enter_shape(size, delta, progress){
   // and wants to pass just width and height, we make these ratios to know where
   // to put the elbow joint
 
-  width_ratio = unit_length(1.25) / unit_length(1.5);
-  height_ratio = unit_length(1) / unit_length(2);
-
   delta = delta / 2;
 
   pointArray = [
@@ -37,22 +37,33 @@ module ISO_enter_shape(size, delta, progress){
   }
 }
 
-function iso_enter_vertices(width, height, width_ratio, height_ratio, wd, hd) = [
+function iso_enter_vertices(size, delta, progress, thickness_difference) = [
-  [                   0-wd,                     0-hd], // top right
+  [                       0-delta.x/2 * progress - thickness_difference/8,                      0 - delta.y / 2 * progress - thickness_difference/8], // top right
-  [                   0-wd,               -height+hd], // bottom right
+  [                       0-delta.x/2 * progress - thickness_difference/8,               -size[1] + delta.y / 2 * progress + thickness_difference/8], // bottom right
-  [-width * width_ratio+wd,               -height+hd], // bottom left
+  [-size[0] * width_ratio + delta.x/2 * progress + thickness_difference/8,               -size[1] + delta.y / 2 * progress + thickness_difference/8], // bottom left
-  [-width * width_ratio+wd,-height * height_ratio+hd], // inner middle point
+  [-size[0] * width_ratio + delta.x/2 * progress + thickness_difference/8,-size[1] * height_ratio + delta.y / 2 * progress + thickness_difference/2], // inner middle point
-  [              -width+wd,-height * height_ratio+hd], // outer middle point
+  [              -size[0] + delta.x/2 * progress + thickness_difference/8,-size[1] * height_ratio + delta.y / 2 * progress + thickness_difference/2], // outer middle point
-  [              -width+wd,                     0-hd]  // top left
+  [              -size[0] + delta.x/2 * progress + thickness_difference/8,                      0 - delta.y / 2 * progress - thickness_difference/8]  // top left
 ] + [
-  [(width * width_ratio)/2, height/2 ],
+  [(size[0] * width_ratio)/2, size[1]/2 ],
-  [(width * width_ratio)/2, height/2 ],
+  [(size[0] * width_ratio)/2, size[1]/2 ],
-  [(width * width_ratio)/2, height/2 ],
+  [(size[0] * width_ratio)/2, size[1]/2 ],
-  [(width * width_ratio)/2, height/2 ],
+  [(size[0] * width_ratio)/2, size[1]/2 ],
-  [(width * width_ratio)/2, height/2 ],
+  [(size[0] * width_ratio)/2, size[1]/2 ],
-  [(width * width_ratio)/2, height/2 ]
+  [(size[0] * width_ratio)/2, size[1]/2 ]
 ];
 
 // no rounding on the corners at all
 function skin_iso_enter_shape(size, delta, progress, thickness_difference) =
-  iso_enter_vertices(size.x, size.y, unit_length(1.25) / unit_length(1.5), unit_length(1) / unit_length(2), thickness_difference/2 + delta.x * progress/2, thickness_difference/2 + delta.y * progress/2);
+  polyRound(
+    add_rounding(
+      iso_enter_vertices(
+        size,
+        [delta.x - $side_sculpting(progress), delta.y - $side_sculpting(progress)],
+        progress,
+        thickness_difference
+      ),
+      $corner_radius + $corner_sculpting(progress)
+    ),
+    $shape_facets
+  );

src/shapes/rounded_square.scad

@@ -1,4 +1,5 @@
-include <../libraries/rounded_rectangle_profile.scad>
+include <square.scad>
+include <../libraries/round-anything/polyround.scad>
 
 module rounded_square_shape(size, delta, progress, center = true) {
   offset(r=$corner_radius, $fa=360/$shape_facets){
@@ -7,6 +8,5 @@ module rounded_square_shape(size, delta, progress, center = true) {
 }
 
 // for skin
-
 function skin_rounded_square(size, delta, progress, thickness_difference) =
-  rounded_rectangle_profile(size - (delta * progress) - [thickness_difference, thickness_difference], fn=$shape_facets, r=$corner_radius);
+  polyRound(add_rounding(rectangle_profile(size - (delta * progress)), $corner_radius), $shape_facets/4);

src/shapes/sculpted_square.scad

@@ -1,15 +1,5 @@
-include <../libraries/rounded_rectangle_profile.scad>
-
 // rounded square shape with additional sculpting functions to better approximate
 
-// When sculpting sides, how much in should the tops come
-$side_sculpting_factor = 4.5;
-// When sculpting corners, how much extra radius should be added
-$corner_sculpting_factor = 1;
-// When doing more side sculpting corners, how much extra radius should be added
-$more_side_sculpting_factor = 0.4;
-
-
 // side sculpting functions
 // bows the sides out on stuff like SA and DSA keycaps
 function side_sculpting(progress) = (1 - progress) * $side_sculpting_factor;
@@ -23,9 +13,9 @@ module sculpted_square_shape(size, delta, progress) {
   width_difference = delta[0];
   height_difference = delta[1];
   // makes the sides bow
-  extra_side_size =  side_sculpting(progress);
+  extra_side_size =  $side_sculpting(progress);
   // makes the rounded corners of the keycap grow larger as they move upwards
-  extra_corner_size = corner_sculpting(progress);
+  extra_corner_size = $corner_sculpting(progress);
 
   // computed values for this slice
   extra_width_this_slice = (width_difference - extra_side_size) * progress;
@@ -44,8 +34,35 @@ module sculpted_square_shape(size, delta, progress) {
   }
 }
 
-// fudging the hell out of this, I don't remember what the negative-offset-positive-offset was doing in the module above
+function new_side_rounded_square(size, r, cornerRadius=0) =
-// also no 'bowed' square shape for now
+  let(
+    width = (size.x - r)/2,
+    height = (size.y - r)/2,
+
+    // fudge numbers! the radius conflict resolution in polyround smooths out
+    // the entire shape based on the ratios between conflicting radii. bumping
+    // these up makes the whole shape more fluid
+    widthRadius = r ? width*8 : 0,
+    heightRadius = r ? height*8 : 0,
+
+    bow = r/2,
+
+    // close enough :/
+    facets = 360 / $shape_facets/2,
+
+    points = [
+       [-width,-height,cornerRadius],
+       [0,-height-bow,widthRadius],
+       [width,-height,cornerRadius],
+       [width + bow,0,heightRadius],
+       [width,height,cornerRadius],
+       [0,height + bow,widthRadius],
+       [-width,height,cornerRadius],
+       [-width-bow,0,heightRadius]
+    ]
+  ) polyRound(points,facets);
+
+
 function skin_sculpted_square_shape(size, delta, progress, thickness_difference) =
   let(
     width = size[0],
@@ -54,9 +71,9 @@ function skin_sculpted_square_shape(size, delta, progress, thickness_difference)
     width_difference = delta[0],
     height_difference = delta[1],
     // makes the sides bow
-    extra_side_size =  side_sculpting(progress),
+    extra_side_size =  $side_sculpting(progress),
     // makes the rounded corners of the keycap grow larger as they move upwards
-    extra_corner_size = corner_sculpting(progress),
+    extra_corner_size = $corner_sculpting(progress),
 
     // computed values for this slice
     extra_width_this_slice = (width_difference - extra_side_size) * progress,
@@ -67,13 +84,7 @@ function skin_sculpted_square_shape(size, delta, progress, thickness_difference)
       width - extra_width_this_slice - thickness_difference,
       height - extra_height_this_slice - thickness_difference
     ]
-  ) double_rounded_rectangle_profile(square_size - [extra_corner_radius_this_slice, extra_corner_radius_this_slice]/4, fn=$shape_facets, r=extra_corner_radius_this_slice/1.5 + $more_side_sculpting_factor * progress);
+  ) new_side_rounded_square(square_size, $more_side_sculpting_factor * progress, extra_corner_radius_this_slice);
-
-  /* offset(r = extra_corner_radius_this_slice) {
-    offset(r = -extra_corner_radius_this_slice) {
-      side_rounded_square(square_size, r = $more_side_sculpting_factor * progress);
-    }
-  } */
 
 
 module side_rounded_square(size, r) {

src/shapes/square.scad

@@ -1,6 +1,4 @@
 use <../functions.scad>
-include <../libraries/rounded_rectangle_profile.scad>
-
 
 // we do this weird key_shape_type check here because rounded_square uses
 // square_shape, and we want flat sides to work for that too.
@@ -23,14 +21,23 @@ module square_shape(size, delta, progress){
 // shape makes the sides flat by making the top a trapezoid.
 // This obviously doesn't work with rounded sides at all
 module flat_sided_square_shape(size, delta, progress) {
-  polygon(points=[
+  polygon(skin_flat_sided_square_shape(size, delta, progress));
-    [(-size.x + (delta.x + extra_keytop_length_for_flat_sides()) * progress)/2, (-size.y + delta.y * progress)/2],
-    [(size.x - (delta.x + extra_keytop_length_for_flat_sides()) * progress)/2,(-size.y + delta.y * progress)/2],
-    [(size.x - (delta.x - extra_keytop_length_for_flat_sides()) * progress)/2, (size.y - delta.y * progress)/2],
-    [(-size.x + (delta.x - extra_keytop_length_for_flat_sides()) * progress)/2, (size.y - delta.y * progress)/2]
-  ]);
 }
 
+function skin_flat_sided_square_shape(size,delta,progress) = [
+  [(-size.x + (delta.x + extra_keytop_length_for_flat_sides()) * progress)/2, (-size.y + delta.y * progress)/2],
+  [(size.x - (delta.x + extra_keytop_length_for_flat_sides()) * progress)/2,(-size.y + delta.y * progress)/2],
+  [(size.x - (delta.x - extra_keytop_length_for_flat_sides()) * progress)/2, (size.y - delta.y * progress)/2],
+  [(-size.x + (delta.x - extra_keytop_length_for_flat_sides()) * progress)/2, (size.y - delta.y * progress)/2]
+];
+
+function rectangle_profile(size) = [
+  [-size.x/2, -size.y/2],
+  [size.x/2, -size.y/2],
+  [size.x/2, size.y/2],
+  [-size.x/2, size.y/2],
+];
+
 function skin_square_shape(size, delta, progress, thickness_difference) =
   let(
     width = size[0],
@@ -43,4 +50,4 @@ function skin_square_shape(size, delta, progress, thickness_difference) =
       width - width_difference - thickness_difference,
       height - height_difference - thickness_difference
     ]
-  ) rectangle_profile(square_size, fn=36);
+  ) $key_shape_type == "flat_sided_square" ? skin_flat_sided_square_shape(size, delta, progress) : rectangle_profile(square_size);

src/stem_supports/brim.scad

@@ -16,12 +16,12 @@ module brim_support(stem_type, stem_support_height, slop) {
         }
       }
 
-      inside_cherry_cross(slop);
+      inside_cherry_cross($stem_inner_slop);
     }
   } else if (stem_type == "rounded_cherry") {
     difference() {
       cylinder(d=$rounded_cherry_stem_d * 2, h=stem_support_height);
-      inside_cherry_cross(slop);
+      inside_cherry_cross($stem_inner_slop);
     }
   } else if (stem_type == "box_cherry") {
     difference() {
@@ -31,7 +31,7 @@ module brim_support(stem_type, stem_support_height, slop) {
         }
       }
 
-      inside_cherry_cross(slop);
+      inside_cherry_cross($stem_inner_slop);
     }
   } else if (stem_type == "cherry_stabilizer") {
     difference() {
@@ -41,7 +41,7 @@ module brim_support(stem_type, stem_support_height, slop) {
         }
       }
 
-      inside_cherry_cross(slop);
+      inside_cherry_cross($stem_inner_slop);
     }
   } else if(stem_type == "choc") {
     translate([-5.7/2,0,0]) linear_extrude(height=stem_support_height) {

src/stem_supports/tines.scad

@@ -1,17 +1,20 @@
 include <../functions.scad>
 include <../stems/cherry.scad>
 
+/* NOTE: every reference to total_key_width and total_key_height
+ * is multiplied by two in order to account for offset stems
+ */ 
 module centered_tines(stem_support_height) {
   if ($key_length < 2) {
     translate([0,0,$stem_support_height / 2]) {
-      cube([total_key_width(), 0.5, $stem_support_height], center = true);
+      cube([total_key_width()*2, 0.5, $stem_support_height], center = true);
     }
   }
 
   translate([0,0,$stem_support_height / 2]) {
     cube([
       1,
-      total_key_height(),
+      total_key_height()*2,
       $stem_support_height
     ],
     center = true);
@@ -19,16 +22,13 @@ module centered_tines(stem_support_height) {
 }
 
 module tines_support(stem_type, stem_support_height, slop) {
-  extra_height = $extra_long_stem_support ? ($unit - total_key_height()) + 0.1 : -$wall_thickness/4; // fudge
-  extra_width = $extra_long_stem_support ? ($unit - total_key_width()) + 0.1 : -$wall_thickness/4;
-
   if (stem_type == "cherry" || stem_type == "costar_stabilizer") {
     difference () {
       union() {
         if ($key_length < 2) {
           translate([0,0,$stem_support_height / 2]) {
             cube([
-              total_key_width() + extra_width*2,
+              total_key_width()*2,
               0.5,
               $stem_support_height
             ], center = true);
@@ -36,18 +36,18 @@ module tines_support(stem_type, stem_support_height, slop) {
         }
 
         // 2 vertical tines holding either side of the cruciform
-        for (x = [1.15, -1.15]) {
+        for (x = [2, -2]) {
           translate([x,0,$stem_support_height / 2]) {
             cube([
               0.5,
-              total_key_height() + extra_height*2, // this is to extend past
+              total_key_height()*2, // this is to extend past
               $stem_support_height
             ], center = true);
           }
         }
       }
 
-      inside_cherry_cross(slop);
+      inside_cherry_cross($stem_inner_slop);
     }
   } else if (stem_type == "cherry_stabilizer") {
     difference () {
@@ -55,7 +55,7 @@ module tines_support(stem_type, stem_support_height, slop) {
         translate([x,0,$stem_support_height / 2]) {
           cube([
             1,
-            total_key_height($wall_thickness),
+            total_key_height()*2,
             $stem_support_height
           ], center = true);
         }
@@ -67,19 +67,19 @@ module tines_support(stem_type, stem_support_height, slop) {
     difference () {
       centered_tines(stem_support_height);
 
-      inside_cherry_cross(slop);
+      inside_cherry_cross($stem_inner_slop);
     }
   } else if (stem_type == "rounded_cherry") {
     difference () {
       centered_tines(stem_support_height);
 
-      inside_cherry_cross(slop);
+      inside_cherry_cross($stem_inner_slop);
     }
   } else if (stem_type == "alps"){
     centered_tines(stem_support_height);
   } else if (stem_type == "choc"){
-    if ($key_length < 2) translate([0,0,$stem_support_height / 2]) cube([total_key_width($wall_thickness)+$wall_thickness/4, 0.42, $stem_support_height], center = true);
+    if ($key_length < 2) translate([0,0,$stem_support_height / 2]) cube([total_key_width(), 0.42, $stem_support_height], center = true);
-    /* translate([-5.7/2,0,$stem_support_height / 2]) cube([0.5, total_key_height($wall_thickness), $stem_support_height], center = true); */
+    /* translate([-5.7/2,0,$stem_support_height / 2]) cube([0.5, total_key_height(), $stem_support_height], center = true); */
-    /* translate([5.7/2,0,$stem_support_height / 2]) cube([0.5, total_key_height($wall_thickness), $stem_support_height], center = true); */
+    /* translate([5.7/2,0,$stem_support_height / 2]) cube([0.5, total_key_height(), $stem_support_height], center = true); */
   }
 }

src/stems.scad

@@ -8,21 +8,21 @@ include <stems/choc.scad>
 
 
 //whole stem, alps or cherry, trimmed to fit
-module stem(stem_type, depth, slop){
+module stem(stem_type, depth, slop, throw){
     if (stem_type == "alps") {
-      alps_stem(depth, slop);
+      alps_stem(depth, slop, throw);
     } else if (stem_type == "cherry" || stem_type == "costar_stabilizer") {
-      cherry_stem(depth, slop);
+      cherry_stem(depth, slop, throw);
     } else if (stem_type == "rounded_cherry") {
-      rounded_cherry_stem(depth, slop);
+      rounded_cherry_stem(depth, slop, throw);
     } else if (stem_type == "box_cherry") {
-      box_cherry_stem(depth, slop);
+      box_cherry_stem(depth, slop, throw);
     } else if (stem_type == "filled") {
       filled_stem();
     } else if (stem_type == "cherry_stabilizer") {
-      cherry_stabilizer_stem(depth, slop);
+      cherry_stabilizer_stem(depth, slop, throw);
     } else if (stem_type == "choc") {
-      choc_stem(depth, slop);
+      choc_stem(depth, slop, throw);
     } else if (stem_type == "disable") {
       children();
     } else {

src/stems/alps.scad

@@ -1,4 +1,4 @@
-module alps_stem(depth, has_brim, slop){
+module alps_stem(depth, slop, throw){
   linear_extrude(height=depth) {
     square($alps_stem, center = true);
   }

src/stems/box_cherry.scad

@@ -1,7 +1,7 @@
 include <../functions.scad>
 include <cherry.scad>
 
-module box_cherry_stem(depth, slop) {
+module box_cherry_stem(depth, slop, throw) {
   difference(){
     // outside shape
     linear_extrude(height = depth) {
@@ -11,6 +11,6 @@ module box_cherry_stem(depth, slop) {
     }
 
     // inside cross
-    inside_cherry_cross(slop);
+    inside_cherry_cross($stem_inner_slop);
   }
 }

src/stems/cherry.scad

@@ -2,7 +2,7 @@ include <../functions.scad>
 
 // extra length to the vertical tine of the inside cherry cross
 // splits the stem into halves - allows easier fitment
-extra_vertical = 0.6;
+extra_vertical = 100;
 
 module inside_cherry_cross(slop) {
   // inside cross
@@ -23,7 +23,7 @@ module inside_cherry_cross(slop) {
   }
 }
 
-module cherry_stem(depth, slop) {
+module cherry_stem(depth, slop, throw) {
   difference(){
     // outside shape
     linear_extrude(height = depth) {

src/stems/cherry_stabilizer.scad

@@ -4,18 +4,18 @@ include <../functions.scad>
 // splits the stem into halves - allows easier fitment
 extra_vertical = 0.6;
 
-module inside_cherry_stabilizer_cross(slop) {
+module inside_cherry_stabilizer_cross(slop, throw) {
   // inside cross
   // translation purely for aesthetic purposes, to get rid of that awful lattice
   translate([0,0,-SMALLEST_POSSIBLE]) {
-    linear_extrude(height = $stem_throw) {
+    linear_extrude(height = throw) {
       square(cherry_cross(slop, extra_vertical)[0], center=true);
       square(cherry_cross(slop, extra_vertical)[1], center=true);
     }
   }
 }
 
-module cherry_stabilizer_stem(depth, slop) {
+module cherry_stabilizer_stem(depth, slop, throw) {
   difference(){
     // outside shape
     linear_extrude(height = depth) {
@@ -24,6 +24,6 @@ module cherry_stabilizer_stem(depth, slop) {
       }
     }
 
-    inside_cherry_stabilizer_cross(slop);
+    inside_cherry_stabilizer_cross(slop, throw);
   }
 }

src/stems/choc.scad

@@ -5,7 +5,8 @@ positions = [
   [-separation/2, 0],
 ];
 
-module choc_stem(depth, slop){
+// TODO throw not used
+module choc_stem(depth, slop, throw){ 
   for (position=positions) {
     translate([position.x,position.y, depth/2]) single_choc_stem(depth, slop);
   }

src/stems/filled.scad

@@ -1,4 +1,4 @@
-module filled_stem() {
+module filled_stem(_depth, _slop, _throw) {
   // I broke the crap out of this stem type due to the changes I made around how stems are differenced
   // now that we just take the dish out of stems in order to support stuff like
   // bare stem keycaps (and buckling spring eventually) we can't just make a

src/stems/rounded_cherry.scad

@@ -1,12 +1,12 @@
 include <../functions.scad>
 include <cherry.scad>
 
-module rounded_cherry_stem(depth, slop) {
+module rounded_cherry_stem(depth, slop, throw) {
   difference(){
     cylinder(d=$rounded_cherry_stem_d, h=depth);
 
     // inside cross
     // translation purely for aesthetic purposes, to get rid of that awful lattice
-    inside_cherry_cross(slop);
+    inside_cherry_cross($stem_inner_slop);
   }
 }

yarn.lock

@@ -45,11 +45,6 @@ ansi-regex@^2.0.0:
   resolved "https://registry.yarnpkg.com/ansi-regex/-/ansi-regex-2.1.1.tgz#c3b33ab5ee360d86e0e628f0468ae7ef27d654df"
   integrity sha1-w7M6te42DYbg5ijwRorn7yfWVN8=
 
-ansi-regex@^3.0.0:
-  version "3.0.0"
-  resolved "https://registry.yarnpkg.com/ansi-regex/-/ansi-regex-3.0.0.tgz#ed0317c322064f79466c02966bddb605ab37d998"
-  integrity sha1-7QMXwyIGT3lGbAKWa922Bas32Zg=
-
 ansi-styles@^4.1.0:
   version "4.2.1"
   resolved "https://registry.yarnpkg.com/ansi-styles/-/ansi-styles-4.2.1.tgz#90ae75c424d008d2624c5bf29ead3177ebfcf359"
@@ -78,24 +73,11 @@ append-buffer@^1.0.2:
   dependencies:
     buffer-equal "^1.0.0"
 
-aproba@^1.0.3:
-  version "1.2.0"
-  resolved "https://registry.yarnpkg.com/aproba/-/aproba-1.2.0.tgz#6802e6264efd18c790a1b0d517f0f2627bf2c94a"
-  integrity sha512-Y9J6ZjXtoYh8RnXVCMOU/ttDmk1aBjunq9vO0ta5x85WDQiQfUF9sIPBITdbiiIVcBo03Hi3jMxigBtsddlXRw==
-
 archy@^1.0.0:
   version "1.0.0"
   resolved "https://registry.yarnpkg.com/archy/-/archy-1.0.0.tgz#f9c8c13757cc1dd7bc379ac77b2c62a5c2868c40"
   integrity sha1-+cjBN1fMHde8N5rHeyxipcKGjEA=
 
-are-we-there-yet@~1.1.2:
-  version "1.1.5"
-  resolved "https://registry.yarnpkg.com/are-we-there-yet/-/are-we-there-yet-1.1.5.tgz#4b35c2944f062a8bfcda66410760350fe9ddfc21"
-  integrity sha512-5hYdAkZlcG8tOLujVDTgCT+uPX0VnpAH28gWsLfzpXYm7wP6mp5Q/gYyR7YQ0cKVJcXJnl3j2kpBan13PtQf6w==
-  dependencies:
-    delegates "^1.0.0"
-    readable-stream "^2.0.6"
-
 arr-diff@^1.0.1:
   version "1.1.0"
   resolved "https://registry.yarnpkg.com/arr-diff/-/arr-diff-1.1.0.tgz#687c32758163588fef7de7b36fabe495eb1a399a"
@@ -308,6 +290,14 @@ cache-base@^1.0.1:
     union-value "^1.0.0"
     unset-value "^1.0.0"
 
+call-bind@^1.0.0:
+  version "1.0.2"
+  resolved "https://registry.yarnpkg.com/call-bind/-/call-bind-1.0.2.tgz#b1d4e89e688119c3c9a903ad30abb2f6a919be3c"
+  integrity sha512-7O+FbCihrB5WGbFYesctwmTKae6rOiIzmz1icreWJ+0aA7LJfuqhEso2T9ncpcFtzMQtzXf2QGGueWJGTYsqrA==
+  dependencies:
+    function-bind "^1.1.1"
+    get-intrinsic "^1.0.2"
+
 camelcase@^3.0.0:
   version "3.0.0"
   resolved "https://registry.yarnpkg.com/camelcase/-/camelcase-3.0.0.tgz#32fc4b9fcdaf845fcdf7e73bb97cac2261f0ab0a"
@@ -340,11 +330,6 @@ chokidar@^2.0.0:
   optionalDependencies:
     fsevents "^1.2.7"
 
-chownr@^1.1.1:
-  version "1.1.4"
-  resolved "https://registry.yarnpkg.com/chownr/-/chownr-1.1.4.tgz#6fc9d7b42d32a583596337666e7d08084da2cc6b"
-  integrity sha512-jJ0bqzaylmJtVnNgzTeSOs8DPavpbYgEr/b0YL8/2GO3xJEhInFmhKMUnEJQjZumK7KXGFhUy89PrsJWlakBVg==
-
 class-utils@^0.3.5:
   version "0.3.6"
   resolved "https://registry.yarnpkg.com/class-utils/-/class-utils-0.3.6.tgz#f93369ae8b9a7ce02fd41faad0ca83033190c463"
@@ -447,11 +432,6 @@ concat-stream@^1.6.0:
     readable-stream "^2.2.2"
     typedarray "^0.0.6"
 
-console-control-strings@^1.0.0, console-control-strings@~1.1.0:
-  version "1.1.0"
-  resolved "https://registry.yarnpkg.com/console-control-strings/-/console-control-strings-1.1.0.tgz#3d7cf4464db6446ea644bf4b39507f9851008e8e"
-  integrity sha1-PXz0Rk22RG6mRL9LOVB/mFEAjo4=
-
 convert-source-map@^1.5.0:
   version "1.7.0"
   resolved "https://registry.yarnpkg.com/convert-source-map/-/convert-source-map-1.7.0.tgz#17a2cb882d7f77d3490585e2ce6c524424a3a442"
@@ -465,12 +445,12 @@ copy-descriptor@^0.1.0:
   integrity sha1-Z29us8OZl8LuGsOpJP1hJHSPV40=
 
 copy-props@^2.0.1:
-  version "2.0.4"
+  version "2.0.5"
-  resolved "https://registry.yarnpkg.com/copy-props/-/copy-props-2.0.4.tgz#93bb1cadfafd31da5bb8a9d4b41f471ec3a72dfe"
+  resolved "https://registry.yarnpkg.com/copy-props/-/copy-props-2.0.5.tgz#03cf9ae328d4ebb36f8f1d804448a6af9ee3f2d2"
-  integrity sha512-7cjuUME+p+S3HZlbllgsn2CDwS+5eCCX16qBgNC4jgSTf49qR1VKy/Zhl400m0IQXl/bPGEVqncgUUMjrr4s8A==
+  integrity sha512-XBlx8HSqrT0ObQwmSzM7WE5k8FxTV75h1DX1Z3n6NhQ/UYYAvInWYmG06vFt7hQZArE2fuO62aihiWIVQwh1sw==
   dependencies:
-    each-props "^1.3.0"
+    each-props "^1.3.2"
-    is-plain-object "^2.0.1"
+    is-plain-object "^5.0.0"
 
 core-util-is@~1.0.0:
   version "1.0.2"
@@ -492,13 +472,6 @@ debug@^2.2.0, debug@^2.3.3:
   dependencies:
     ms "2.0.0"
 
-debug@^3.2.6:
-  version "3.2.6"
-  resolved "https://registry.yarnpkg.com/debug/-/debug-3.2.6.tgz#e83d17de16d8a7efb7717edbe5fb10135eee629b"
-  integrity sha512-mel+jf7nrtEl5Pn1Qx46zARXKDpBbvzezse7p7LqINmdoIk8PYP5SySaxEmYv6TZ0JyEKA1hsCId6DIhgITtWQ==
-  dependencies:
-    ms "^2.1.1"
-
 decamelize@^1.1.1:
   version "1.2.0"
   resolved "https://registry.yarnpkg.com/decamelize/-/decamelize-1.2.0.tgz#f6534d15148269b20352e7bee26f501f9a191290"
@@ -509,11 +482,6 @@ decode-uri-component@^0.2.0:
   resolved "https://registry.yarnpkg.com/decode-uri-component/-/decode-uri-component-0.2.0.tgz#eb3913333458775cb84cd1a1fae062106bb87545"
   integrity sha1-6zkTMzRYd1y4TNGh+uBiEGu4dUU=
 
-deep-extend@^0.6.0:
-  version "0.6.0"
-  resolved "https://registry.yarnpkg.com/deep-extend/-/deep-extend-0.6.0.tgz#c4fa7c95404a17a9c3e8ca7e1537312b736330ac"
-  integrity sha512-LOHxIOaPYdHlJRtCQfDIVZtfw/ufM8+rVj649RIHzcm/vGwQRXFt6OPqIFWsm2XEMrNIEtWR64sY1LEKD2vAOA==
-
 default-compare@^1.0.0:
   version "1.0.0"
   resolved "https://registry.yarnpkg.com/default-compare/-/default-compare-1.0.0.tgz#cb61131844ad84d84788fb68fd01681ca7781a2f"
@@ -526,7 +494,7 @@ default-resolution@^2.0.0:
   resolved "https://registry.yarnpkg.com/default-resolution/-/default-resolution-2.0.0.tgz#bcb82baa72ad79b426a76732f1a81ad6df26d684"
   integrity sha1-vLgrqnKtebQmp2cy8aga1t8m1oQ=
 
-define-properties@^1.1.2:
+define-properties@^1.1.3:
   version "1.1.3"
   resolved "https://registry.yarnpkg.com/define-properties/-/define-properties-1.1.3.tgz#cf88da6cbee26fe6db7094f61d870cbd84cee9f1"
   integrity sha512-3MqfYKj2lLzdMSf8ZIZE/V+Zuy+BgD6f164e8K2w7dgnpKArBDerGYpM46IYYcjnkdPNMjPk9A6VFB8+3SKlXQ==
@@ -555,21 +523,11 @@ define-property@^2.0.2:
     is-descriptor "^1.0.2"
     isobject "^3.0.1"
 
-delegates@^1.0.0:
-  version "1.0.0"
-  resolved "https://registry.yarnpkg.com/delegates/-/delegates-1.0.0.tgz#84c6e159b81904fdca59a0ef44cd870d31250f9a"
-  integrity sha1-hMbhWbgZBP3KWaDvRM2HDTElD5o=
-
 detect-file@^1.0.0:
   version "1.0.0"
   resolved "https://registry.yarnpkg.com/detect-file/-/detect-file-1.0.0.tgz#f0d66d03672a825cb1b73bdb3fe62310c8e552b7"
   integrity sha1-8NZtA2cqglyxtzvbP+YjEMjlUrc=
 
-detect-libc@^1.0.2:
-  version "1.0.3"
-  resolved "https://registry.yarnpkg.com/detect-libc/-/detect-libc-1.0.3.tgz#fa137c4bd698edf55cd5cd02ac559f91a4c4ba9b"
-  integrity sha1-+hN8S9aY7fVc1c0CrFWfkaTEups=
-
 duplexify@^3.6.0:
   version "3.7.1"
   resolved "https://registry.yarnpkg.com/duplexify/-/duplexify-3.7.1.tgz#2a4df5317f6ccfd91f86d6fd25d8d8a103b88309"
@@ -580,7 +538,7 @@ duplexify@^3.6.0:
     readable-stream "^2.0.0"
     stream-shift "^1.0.0"
 
-each-props@^1.3.0:
+each-props@^1.3.2:
   version "1.3.2"
   resolved "https://registry.yarnpkg.com/each-props/-/each-props-1.3.2.tgz#ea45a414d16dd5cfa419b1a81720d5ca06892333"
   integrity sha512-vV0Hem3zAGkJAyU7JSjixeU66rwdynTAa1vofCrSA5fEln+m67Az9CcnkVD776/fsN/UjIWmBDoNRS6t6G9RfA==
@@ -802,13 +760,6 @@ fragment-cache@^0.2.1:
   dependencies:
     map-cache "^0.2.2"
 
-fs-minipass@^1.2.5:
-  version "1.2.7"
-  resolved "https://registry.yarnpkg.com/fs-minipass/-/fs-minipass-1.2.7.tgz#ccff8570841e7fe4265693da88936c55aed7f7c7"
-  integrity sha512-GWSSJGFy4e9GUeCcbIkED+bgAoFyj7XF1mV8rma3QW4NIqX9Kyx79N/PF61H5udOV3aY1IaMLs6pGbH71nlCTA==
-  dependencies:
-    minipass "^2.6.0"
-
 fs-mkdirp-stream@^1.0.0:
   version "1.0.0"
   resolved "https://registry.yarnpkg.com/fs-mkdirp-stream/-/fs-mkdirp-stream-1.0.0.tgz#0b7815fc3201c6a69e14db98ce098c16935259eb"
@@ -835,25 +786,20 @@ function-bind@^1.1.1:
   resolved "https://registry.yarnpkg.com/function-bind/-/function-bind-1.1.1.tgz#a56899d3ea3c9bab874bb9773b7c5ede92f4895d"
   integrity sha512-yIovAzMX49sF8Yl58fSCWJ5svSLuaibPxXQJFLmBObTuCr0Mf1KiPopGM9NiFjiYBCbfaa2Fh6breQ6ANVTI0A==
 
-gauge@~2.7.3:
-  version "2.7.4"
-  resolved "https://registry.yarnpkg.com/gauge/-/gauge-2.7.4.tgz#2c03405c7538c39d7eb37b317022e325fb018bf7"
-  integrity sha1-LANAXHU4w51+s3sxcCLjJfsBi/c=
-  dependencies:
-    aproba "^1.0.3"
-    console-control-strings "^1.0.0"
-    has-unicode "^2.0.0"
-    object-assign "^4.1.0"
-    signal-exit "^3.0.0"
-    string-width "^1.0.1"
-    strip-ansi "^3.0.1"
-    wide-align "^1.1.0"
-
 get-caller-file@^1.0.1:
   version "1.0.3"
   resolved "https://registry.yarnpkg.com/get-caller-file/-/get-caller-file-1.0.3.tgz#f978fa4c90d1dfe7ff2d6beda2a515e713bdcf4a"
   integrity sha512-3t6rVToeoZfYSGd8YoLFR2DJkiQrIiUrGcjvFX2mDw3bn6k2OtwHN0TNCLbBO+w8qTvimhDkv+LSscbJY1vE6w==
 
+get-intrinsic@^1.0.2:
+  version "1.1.1"
+  resolved "https://registry.yarnpkg.com/get-intrinsic/-/get-intrinsic-1.1.1.tgz#15f59f376f855c446963948f0d24cd3637b4abc6"
+  integrity sha512-kWZrnVM42QCiEA2Ig1bG8zjoIMOgxWwYCEeNdwY6Tv/cOSeGpcoX4pXHfKUxNKVoArnrEr2e9srnAxxGIraS9Q==
+  dependencies:
+    function-bind "^1.1.1"
+    has "^1.0.3"
+    has-symbols "^1.0.1"
+
 get-value@^2.0.3, get-value@^2.0.6:
   version "2.0.6"
   resolved "https://registry.yarnpkg.com/get-value/-/get-value-2.0.6.tgz#dc15ca1c672387ca76bd37ac0a395ba2042a2c28"
@@ -895,7 +841,7 @@ glob-watcher@^5.0.3:
     just-debounce "^1.0.0"
     object.defaults "^1.1.0"
 
-glob@^7.1.1, glob@^7.1.3:
+glob@^7.1.1:
   version "7.1.6"
   resolved "https://registry.yarnpkg.com/glob/-/glob-7.1.6.tgz#141f33b81a7c2492e125594307480c46679278a6"
   integrity sha512-LwaxwyZ72Lk7vZINtNNrywX0ZuLyStrdDtabefZKAY5ZGJhVtgdznluResxNmPitE0SAO+O26sWTHeKSI2wMBA==
@@ -1016,15 +962,10 @@ has-flag@^4.0.0:
   resolved "https://registry.yarnpkg.com/has-flag/-/has-flag-4.0.0.tgz#944771fd9c81c81265c4d6941860da06bb59479b"
   integrity sha512-EykJT/Q1KjTWctppgIAgfSO0tKVuZUjhgMr17kqTumMl6Afv3EISleU7qZUzoXDFTAHTDC4NOoG/ZxU3EvlMPQ==
 
-has-symbols@^1.0.0:
+has-symbols@^1.0.1:
-  version "1.0.1"
+  version "1.0.2"
-  resolved "https://registry.yarnpkg.com/has-symbols/-/has-symbols-1.0.1.tgz#9f5214758a44196c406d9bd76cebf81ec2dd31e8"
+  resolved "https://registry.yarnpkg.com/has-symbols/-/has-symbols-1.0.2.tgz#165d3070c00309752a1236a479331e3ac56f1423"
-  integrity sha512-PLcsoqu++dmEIZB+6totNFKq/7Do+Z0u4oT0zKOJNl3lYK6vGwwu2hjHs+68OEZbTjiUE9bgOABXbP/GvrS0Kg==
+  integrity sha512-chXa79rL/UC2KlX17jo3vRGz0azaWEx5tGqZg5pO3NUyEJVB17dMruQlzCCOfUvElghKcm5194+BCRvi2Rv/Gw==
-
-has-unicode@^2.0.0:
-  version "2.0.1"
-  resolved "https://registry.yarnpkg.com/has-unicode/-/has-unicode-2.0.1.tgz#e0e6fe6a28cf51138855e086d1691e771de2a8b9"
-  integrity sha1-4Ob+aijPUROIVeCG0Wkedx3iqLk=
 
 has-value@^0.3.1:
   version "0.3.1"
@@ -1057,6 +998,13 @@ has-values@^1.0.0:
     is-number "^3.0.0"
     kind-of "^4.0.0"
 
+has@^1.0.3:
+  version "1.0.3"
+  resolved "https://registry.yarnpkg.com/has/-/has-1.0.3.tgz#722d7cbfc1f6aa8241f16dd814e011e1f41e8796"
+  integrity sha512-f2dvO0VU6Oej7RkWJGrehjbzMAjFp5/VKPp5tTpWIV4JHHZK1/BxbFRtf/siA2SWTe09caDmVtYYzWEIbBS4zw==
+  dependencies:
+    function-bind "^1.1.1"
+
 homedir-polyfill@^1.0.1:
   version "1.0.3"
   resolved "https://registry.yarnpkg.com/homedir-polyfill/-/homedir-polyfill-1.0.3.tgz#743298cef4e5af3e194161fbadcc2151d3a058e8"
@@ -1065,23 +1013,9 @@ homedir-polyfill@^1.0.1:
     parse-passwd "^1.0.0"
 
 hosted-git-info@^2.1.4:
-  version "2.8.8"
+  version "2.8.9"
-  resolved "https://registry.yarnpkg.com/hosted-git-info/-/hosted-git-info-2.8.8.tgz#7539bd4bc1e0e0a895815a2e0262420b12858488"
+  resolved "https://registry.yarnpkg.com/hosted-git-info/-/hosted-git-info-2.8.9.tgz#dffc0bf9a21c02209090f2aa69429e1414daf3f9"
-  integrity sha512-f/wzC2QaWBs7t9IYqB4T3sR1xviIViXJRJTWBlx2Gf3g0Xi5vI7Yy4koXQ1c9OYDGHN9sBy1DQ2AB8fqZBWhUg==
+  integrity sha512-mxIDAb9Lsm6DoOJ7xH+5+X4y1LU/4Hi50L9C5sIswK3JzULS4bwk1FvjdBgvYR4bzT4tuUQiC15FE2f5HbLvYw==
-
-iconv-lite@^0.4.4:
-  version "0.4.24"
-  resolved "https://registry.yarnpkg.com/iconv-lite/-/iconv-lite-0.4.24.tgz#2022b4b25fbddc21d2f524974a474aafe733908b"
-  integrity sha512-v3MXnZAcvnywkTUEZomIActle7RXXeedOR31wwl7VlyoXO4Qi9arvSenNQWne1TcRwhCL1HwLI21bEqdpj8/rA==
-  dependencies:
-    safer-buffer ">= 2.1.2 < 3"
-
-ignore-walk@^3.0.1:
-  version "3.0.3"
-  resolved "https://registry.yarnpkg.com/ignore-walk/-/ignore-walk-3.0.3.tgz#017e2447184bfeade7c238e4aefdd1e8f95b1e37"
-  integrity sha512-m7o6xuOaT1aqheYHKf8W6J5pYH85ZI9w077erOzLje3JsB1gkafkAhHHY19dqjulgIZHFm32Cp5uNZgcQqdJKw==
-  dependencies:
-    minimatch "^3.0.4"
 
 inflight@^1.0.4:
   version "1.0.6"
@@ -1096,10 +1030,10 @@ inherits@2, inherits@^2.0.1, inherits@^2.0.3, inherits@~2.0.3:
   resolved "https://registry.yarnpkg.com/inherits/-/inherits-2.0.4.tgz#0fa2c64f932917c3433a0ded55363aae37416b7c"
   integrity sha512-k/vGaX4/Yla3WzyMCvTQOXYeIHvqOKtnqBduzTHpzpQZzAskKMhZ2K+EnBiSM9zGSoIFeMpXKxa4dYeZIQqewQ==
 
-ini@^1.3.4, ini@~1.3.0:
+ini@^1.3.4:
-  version "1.3.5"
+  version "1.3.8"
-  resolved "https://registry.yarnpkg.com/ini/-/ini-1.3.5.tgz#eee25f56db1c9ec6085e0c22778083f596abf927"
+  resolved "https://registry.yarnpkg.com/ini/-/ini-1.3.8.tgz#a29da425b48806f34767a4efce397269af28432c"
-  integrity sha512-RZY5huIKCMRWDUqZlEi72f/lmXKMvuszcMBduliQ3nnWbx9X/ZBQO7DijMEYS9EhHBb2qacRUMtC7svLwe0lcw==
+  integrity sha512-JV/yugV2uzW5iMRSiZAyDtQd+nxtUnjeLt0acNdw98kKLrvuRVyB80tsREOE7yvGVgalhZ6RNXCmEHkUKBKxew==
 
 interpret@^1.1.0:
   version "1.2.0"
@@ -1206,11 +1140,6 @@ is-fullwidth-code-point@^1.0.0:
   dependencies:
     number-is-nan "^1.0.0"
 
-is-fullwidth-code-point@^2.0.0:
-  version "2.0.0"
-  resolved "https://registry.yarnpkg.com/is-fullwidth-code-point/-/is-fullwidth-code-point-2.0.0.tgz#a3b30a5c4f199183167aaab93beefae3ddfb654f"
-  integrity sha1-o7MKXE8ZkYMWeqq5O+764937ZU8=
-
 is-glob@^3.1.0:
   version "3.1.0"
   resolved "https://registry.yarnpkg.com/is-glob/-/is-glob-3.1.0.tgz#7ba5ae24217804ac70707b96922567486cc3e84a"
@@ -1249,6 +1178,11 @@ is-plain-object@^2.0.1, is-plain-object@^2.0.3, is-plain-object@^2.0.4:
   dependencies:
     isobject "^3.0.1"
 
+is-plain-object@^5.0.0:
+  version "5.0.0"
+  resolved "https://registry.yarnpkg.com/is-plain-object/-/is-plain-object-5.0.0.tgz#4427f50ab3429e9025ea7d52e9043a9ef4159344"
+  integrity sha512-VRSzKkbMm5jMDoKLbltAkFQ5Qr7VDiTFGXxYFXXowVj387GeGNOCsOH6Msy00SGZ3Fp84b1Naa1psqgcCIEP5Q==
+
 is-relative@^1.0.0:
   version "1.0.0"
   resolved "https://registry.yarnpkg.com/is-relative/-/is-relative-1.0.0.tgz#a1bb6935ce8c5dba1e8b9754b9b2dcc020e2260d"
@@ -1475,26 +1409,6 @@ minimatch@^3.0.4:
   dependencies:
     brace-expansion "^1.1.7"
 
-minimist@^1.2.0, minimist@^1.2.5:
-  version "1.2.5"
-  resolved "https://registry.yarnpkg.com/minimist/-/minimist-1.2.5.tgz#67d66014b66a6a8aaa0c083c5fd58df4e4e97602"
-  integrity sha512-FM9nNUYrRBAELZQT3xeZQ7fmMOBg6nWNmJKTcgsJeaLstP/UODVpGsr5OhXhhXg6f+qtJ8uiZ+PUxkDWcgIXLw==
-
-minipass@^2.6.0, minipass@^2.8.6, minipass@^2.9.0:
-  version "2.9.0"
-  resolved "https://registry.yarnpkg.com/minipass/-/minipass-2.9.0.tgz#e713762e7d3e32fed803115cf93e04bca9fcc9a6"
-  integrity sha512-wxfUjg9WebH+CUDX/CdbRlh5SmfZiy/hpkxaRI16Y9W56Pa75sWgd/rvFilSgrauD9NyFymP/+JFV3KwzIsJeg==
-  dependencies:
-    safe-buffer "^5.1.2"
-    yallist "^3.0.0"
-
-minizlib@^1.2.1:
-  version "1.3.3"
-  resolved "https://registry.yarnpkg.com/minizlib/-/minizlib-1.3.3.tgz#2290de96818a34c29551c8a8d301216bd65a861d"
-  integrity sha512-6ZYMOEnmVsdCeTJVE0W9ZD+pVnE8h9Hma/iOwwRDsdQoePpoX56/8B6z3P9VNwppJuBKNRuFDRNRqRWexT9G9Q==
-  dependencies:
-    minipass "^2.9.0"
-
 mixin-deep@^1.2.0:
   version "1.3.2"
   resolved "https://registry.yarnpkg.com/mixin-deep/-/mixin-deep-1.3.2.tgz#1120b43dc359a785dce65b55b82e257ccf479566"
@@ -1503,23 +1417,11 @@ mixin-deep@^1.2.0:
     for-in "^1.0.2"
     is-extendable "^1.0.1"
 
-mkdirp@^0.5.0, mkdirp@^0.5.1:
-  version "0.5.5"
-  resolved "https://registry.yarnpkg.com/mkdirp/-/mkdirp-0.5.5.tgz#d91cefd62d1436ca0f41620e251288d420099def"
-  integrity sha512-NKmAlESf6jMGym1++R0Ra7wvhV+wFW63FaSOFPwRahvea0gMUcGUhVeAg/0BC0wiv9ih5NYPB1Wn1UEI1/L+xQ==
-  dependencies:
-    minimist "^1.2.5"
-
 ms@2.0.0:
   version "2.0.0"
   resolved "https://registry.yarnpkg.com/ms/-/ms-2.0.0.tgz#5608aeadfc00be6c2901df5f9861788de0d597c8"
   integrity sha1-VgiurfwAvmwpAd9fmGF4jeDVl8g=
 
-ms@^2.1.1:
-  version "2.1.2"
-  resolved "https://registry.yarnpkg.com/ms/-/ms-2.1.2.tgz#d09d1f357b443f493382a8eb3ccd183872ae6009"
-  integrity sha512-sGkPx+VjMtmA6MX27oA4FBFELFCZZ4S4XqeGOXCv68tT+jb3vk/RyaKWP0PTKyWtmLSM0b+adUTEvbs1PEaH2w==
-
 mute-stdout@^1.0.0:
   version "1.0.1"
   resolved "https://registry.yarnpkg.com/mute-stdout/-/mute-stdout-1.0.1.tgz#acb0300eb4de23a7ddeec014e3e96044b3472331"
@@ -1547,44 +1449,11 @@ nanomatch@^1.2.9:
     snapdragon "^0.8.1"
     to-regex "^3.0.1"
 
-needle@^2.2.1:
-  version "2.4.1"
-  resolved "https://registry.yarnpkg.com/needle/-/needle-2.4.1.tgz#14af48732463d7475696f937626b1b993247a56a"
-  integrity sha512-x/gi6ijr4B7fwl6WYL9FwlCvRQKGlUNvnceho8wxkwXqN8jvVmmmATTmZPRRG7b/yC1eode26C2HO9jl78Du9g==
-  dependencies:
-    debug "^3.2.6"
-    iconv-lite "^0.4.4"
-    sax "^1.2.4"
-
 next-tick@~1.0.0:
   version "1.0.0"
   resolved "https://registry.yarnpkg.com/next-tick/-/next-tick-1.0.0.tgz#ca86d1fe8828169b0120208e3dc8424b9db8342c"
   integrity sha1-yobR/ogoFpsBICCOPchCS524NCw=
 
-node-pre-gyp@*:
-  version "0.14.0"
-  resolved "https://registry.yarnpkg.com/node-pre-gyp/-/node-pre-gyp-0.14.0.tgz#9a0596533b877289bcad4e143982ca3d904ddc83"
-  integrity sha512-+CvDC7ZttU/sSt9rFjix/P05iS43qHCOOGzcr3Ry99bXG7VX953+vFyEuph/tfqoYu8dttBkE86JSKBO2OzcxA==
-  dependencies:
-    detect-libc "^1.0.2"
-    mkdirp "^0.5.1"
-    needle "^2.2.1"
-    nopt "^4.0.1"
-    npm-packlist "^1.1.6"
-    npmlog "^4.0.2"
-    rc "^1.2.7"
-    rimraf "^2.6.1"
-    semver "^5.3.0"
-    tar "^4.4.2"
-
-nopt@^4.0.1:
-  version "4.0.3"
-  resolved "https://registry.yarnpkg.com/nopt/-/nopt-4.0.3.tgz#a375cad9d02fd921278d954c2254d5aa57e15e48"
-  integrity sha512-CvaGwVMztSMJLOeXPrez7fyfObdZqNUK1cPAEzLHrTybIua9pMdmmPR5YwtfNftIOMv3DPUhFaxsZMNTQO20Kg==
-  dependencies:
-    abbrev "1"
-    osenv "^0.1.4"
-
 nopt@~1.0.10:
   version "1.0.10"
   resolved "https://registry.yarnpkg.com/nopt/-/nopt-1.0.10.tgz#6ddd21bd2a31417b92727dd585f8a6f37608ebee"
@@ -1621,47 +1490,11 @@ now-and-later@^2.0.0:
   dependencies:
     once "^1.3.2"
 
-npm-bundled@^1.0.1:
-  version "1.1.1"
-  resolved "https://registry.yarnpkg.com/npm-bundled/-/npm-bundled-1.1.1.tgz#1edd570865a94cdb1bc8220775e29466c9fb234b"
-  integrity sha512-gqkfgGePhTpAEgUsGEgcq1rqPXA+tv/aVBlgEzfXwA1yiUJF7xtEt3CtVwOjNYQOVknDk0F20w58Fnm3EtG0fA==
-  dependencies:
-    npm-normalize-package-bin "^1.0.1"
-
-npm-normalize-package-bin@^1.0.1:
-  version "1.0.1"
-  resolved "https://registry.yarnpkg.com/npm-normalize-package-bin/-/npm-normalize-package-bin-1.0.1.tgz#6e79a41f23fd235c0623218228da7d9c23b8f6e2"
-  integrity sha512-EPfafl6JL5/rU+ot6P3gRSCpPDW5VmIzX959Ob1+ySFUuuYHWHekXpwdUZcKP5C+DS4GEtdJluwBjnsNDl+fSA==
-
-npm-packlist@^1.1.6:
-  version "1.4.8"
-  resolved "https://registry.yarnpkg.com/npm-packlist/-/npm-packlist-1.4.8.tgz#56ee6cc135b9f98ad3d51c1c95da22bbb9b2ef3e"
-  integrity sha512-5+AZgwru5IevF5ZdnFglB5wNlHG1AOOuw28WhUq8/8emhBmLv6jX5by4WJCh7lW0uSYZYS6DXqIsyZVIXRZU9A==
-  dependencies:
-    ignore-walk "^3.0.1"
-    npm-bundled "^1.0.1"
-    npm-normalize-package-bin "^1.0.1"
-
-npmlog@^4.0.2:
-  version "4.1.2"
-  resolved "https://registry.yarnpkg.com/npmlog/-/npmlog-4.1.2.tgz#08a7f2a8bf734604779a9efa4ad5cc717abb954b"
-  integrity sha512-2uUqazuKlTaSI/dC8AzicUck7+IrEaOnN/e0jd3Xtt1KcGpwx30v50mL7oPyr/h9bL3E4aZccVwpwP+5W9Vjkg==
-  dependencies:
-    are-we-there-yet "~1.1.2"
-    console-control-strings "~1.1.0"
-    gauge "~2.7.3"
-    set-blocking "~2.0.0"
-
 number-is-nan@^1.0.0:
   version "1.0.1"
   resolved "https://registry.yarnpkg.com/number-is-nan/-/number-is-nan-1.0.1.tgz#097b602b53422a522c1afb8790318336941a011d"
   integrity sha1-CXtgK1NCKlIsGvuHkDGDNpQaAR0=
 
-object-assign@^4.1.0:
-  version "4.1.1"
-  resolved "https://registry.yarnpkg.com/object-assign/-/object-assign-4.1.1.tgz#2109adc7965887cfc05cbbd442cac8bfbb360863"
-  integrity sha1-IQmtx5ZYh8/AXLvUQsrIv7s2CGM=
-
 object-copy@^0.1.0:
   version "0.1.0"
   resolved "https://registry.yarnpkg.com/object-copy/-/object-copy-0.1.0.tgz#7e7d858b781bd7c991a41ba975ed3812754e998c"
@@ -1671,7 +1504,7 @@ object-copy@^0.1.0:
     define-property "^0.2.5"
     kind-of "^3.0.3"
 
-object-keys@^1.0.11, object-keys@^1.0.12:
+object-keys@^1.0.12, object-keys@^1.1.1:
   version "1.1.1"
   resolved "https://registry.yarnpkg.com/object-keys/-/object-keys-1.1.1.tgz#1c47f272df277f3b1daf061677d9c82e2322c60e"
   integrity sha512-NuAESUOUMrlIXOfHKzD6bpPu3tYt3xvjNdRIQ+FeT0lNb4K8WR70CaDxhuNguS2XG+GjkyMwOzsN5ZktImfhLA==
@@ -1683,15 +1516,15 @@ object-visit@^1.0.0:
   dependencies:
     isobject "^3.0.0"
 
-object.assign@^4.0.4:
+object.assign@^4.0.4, object.assign@^4.1.0:
-  version "4.1.0"
+  version "4.1.2"
-  resolved "https://registry.yarnpkg.com/object.assign/-/object.assign-4.1.0.tgz#968bf1100d7956bb3ca086f006f846b3bc4008da"
+  resolved "https://registry.yarnpkg.com/object.assign/-/object.assign-4.1.2.tgz#0ed54a342eceb37b38ff76eb831a0e788cb63940"
-  integrity sha512-exHJeq6kBKj58mqGyTQ9DFvrZC/eR6OwxzoM9YRoGBqrXYonaFyGiFMuc9VZrXf7DarreEwMpurG3dd+CNyW5w==
+  integrity sha512-ixT2L5THXsApyiUPYKmW+2EHpXXe5Ii3M+f4e+aJFAHao5amFRW6J0OO6c/LU8Be47utCx2GL89hxGB6XSmKuQ==
   dependencies:
-    define-properties "^1.1.2"
+    call-bind "^1.0.0"
-    function-bind "^1.1.1"
+    define-properties "^1.1.3"
-    has-symbols "^1.0.0"
+    has-symbols "^1.0.1"
-    object-keys "^1.0.11"
+    object-keys "^1.1.1"
 
 object.defaults@^1.0.0, object.defaults@^1.1.0:
   version "1.1.0"
@@ -1740,11 +1573,6 @@ ordered-read-streams@^1.0.0:
   dependencies:
     readable-stream "^2.0.1"
 
-os-homedir@^1.0.0:
-  version "1.0.2"
-  resolved "https://registry.yarnpkg.com/os-homedir/-/os-homedir-1.0.2.tgz#ffbc4988336e0e833de0c168c7ef152121aa7fb3"
-  integrity sha1-/7xJiDNuDoM94MFox+8VISGqf7M=
-
 os-locale@^1.4.0:
   version "1.4.0"
   resolved "https://registry.yarnpkg.com/os-locale/-/os-locale-1.4.0.tgz#20f9f17ae29ed345e8bde583b13d2009803c14d9"
@@ -1752,19 +1580,6 @@ os-locale@^1.4.0:
   dependencies:
     lcid "^1.0.0"
 
-os-tmpdir@^1.0.0:
-  version "1.0.2"
-  resolved "https://registry.yarnpkg.com/os-tmpdir/-/os-tmpdir-1.0.2.tgz#bbe67406c79aa85c5cfec766fe5734555dfa1274"
-  integrity sha1-u+Z0BseaqFxc/sdm/lc0VV36EnQ=
-
-osenv@^0.1.4:
-  version "0.1.5"
-  resolved "https://registry.yarnpkg.com/osenv/-/osenv-0.1.5.tgz#85cdfafaeb28e8677f416e287592b5f3f49ea410"
-  integrity sha512-0CWcCECdMVc2Rw3U5w9ZjqX6ga6ubk1xDVKxtBQPK7wis/0F2r9T6k4ydGYhecl7YUBxBVxhL5oisPsNxAPe2g==
-  dependencies:
-    os-homedir "^1.0.0"
-    os-tmpdir "^1.0.0"
-
 parse-filepath@^1.0.1:
   version "1.0.2"
   resolved "https://registry.yarnpkg.com/parse-filepath/-/parse-filepath-1.0.2.tgz#a632127f53aaf3d15876f5872f3ffac763d6c891"
@@ -1814,9 +1629,9 @@ path-is-absolute@^1.0.0:
   integrity sha1-F0uSaHNVNP+8es5r9TpanhtcX18=
 
 path-parse@^1.0.6:
-  version "1.0.6"
+  version "1.0.7"
-  resolved "https://registry.yarnpkg.com/path-parse/-/path-parse-1.0.6.tgz#d62dbb5679405d72c4737ec58600e9ddcf06d24c"
+  resolved "https://registry.yarnpkg.com/path-parse/-/path-parse-1.0.7.tgz#fbc114b60ca42b30d9daf5858e4bd68bbedb6735"
-  integrity sha512-GSmOT2EbHrINBf9SR7CDELwlJ8AENk3Qn7OikK4nFYAu3Ote2+JYNVvkpAEQm3/TLNEJFD/xZJjzyxg3KBWOzw==
+  integrity sha512-LDJzPVEEEPR+y48z93A0Ed0yXb8pAByGWo/k5YYdYgpY2/2EsOsksJrq7lOHxryrVOn1ejG6oAp8ahvOIQD8sw==
 
 path-root-regex@^0.1.0:
   version "0.1.2"
@@ -1914,16 +1729,6 @@ pumpify@^1.3.5:
     inherits "^2.0.3"
     pump "^2.0.0"
 
-rc@^1.2.7:
-  version "1.2.8"
-  resolved "https://registry.yarnpkg.com/rc/-/rc-1.2.8.tgz#cd924bf5200a075b83c188cd6b9e211b7fc0d3ed"
-  integrity sha512-y3bGgqKj3QBdxLbLkomlohkvsA8gdAiUQlSBJnBhfn+BPxg4bc62d8TcBW15wavDfgexCgccckhcZvywyQYPOw==
-  dependencies:
-    deep-extend "^0.6.0"
-    ini "~1.3.0"
-    minimist "^1.2.0"
-    strip-json-comments "~2.0.1"
-
 read-pkg-up@^1.0.1:
   version "1.0.1"
   resolved "https://registry.yarnpkg.com/read-pkg-up/-/read-pkg-up-1.0.1.tgz#9d63c13276c065918d57f002a57f40a1b643fb02"
@@ -1950,7 +1755,7 @@ read-pkg@^1.0.0:
     string_decoder "^1.1.1"
     util-deprecate "^1.0.1"
 
-readable-stream@^2.0.0, readable-stream@^2.0.1, readable-stream@^2.0.2, readable-stream@^2.0.5, readable-stream@^2.0.6, readable-stream@^2.1.5, readable-stream@^2.2.2, readable-stream@^2.3.3, readable-stream@^2.3.5, readable-stream@^2.3.6, readable-stream@~2.3.6:
+readable-stream@^2.0.0, readable-stream@^2.0.1, readable-stream@^2.0.2, readable-stream@^2.0.5, readable-stream@^2.1.5, readable-stream@^2.2.2, readable-stream@^2.3.3, readable-stream@^2.3.5, readable-stream@^2.3.6, readable-stream@~2.3.6:
   version "2.3.7"
   resolved "https://registry.yarnpkg.com/readable-stream/-/readable-stream-2.3.7.tgz#1eca1cf711aef814c04f62252a36a62f6cb23b57"
   integrity sha512-Ebho8K4jIbHAxnuxi7o42OrZgF/ZTNcsZj6nRKyUmkhLFq8CHItp/fy6hQZuZmP/n3yZ9VBUbp4zz/mX8hmYPw==
@@ -2075,14 +1880,7 @@ ret@~0.1.10:
   resolved "https://registry.yarnpkg.com/ret/-/ret-0.1.15.tgz#b8a4825d5bdb1fc3f6f53c2bc33f81388681c7bc"
   integrity sha512-TTlYpa+OL+vMMNG24xSlQGEJ3B/RzEfUlLct7b5G/ytav+wPrplCpVMFuwzXbkecJrb6IYo1iFb0S9v37754mg==
 
-rimraf@^2.6.1:
+safe-buffer@^5.1.0, safe-buffer@~5.2.0:
-  version "2.7.1"
-  resolved "https://registry.yarnpkg.com/rimraf/-/rimraf-2.7.1.tgz#35797f13a7fdadc566142c29d4f07ccad483e3ec"
-  integrity sha512-uWjbaKIK3T1OSVptzX7Nl6PvQ3qAGtKEtVRjRuazjfL3Bx5eI409VZSqgND+4UNnmzLVdPj9FqFJNPqBZFve4w==
-  dependencies:
-    glob "^7.1.3"
-
-safe-buffer@^5.1.0, safe-buffer@^5.1.2, safe-buffer@~5.2.0:
   version "5.2.0"
   resolved "https://registry.yarnpkg.com/safe-buffer/-/safe-buffer-5.2.0.tgz#b74daec49b1148f88c64b68d49b1e815c1f2f519"
   integrity sha512-fZEwUGbVl7kouZs1jCdMLdt95hdIv0ZeHg6L7qPeciMZhZ+/gdesW4wgTARkrFWEpspjEATAzUGPG8N2jJiwbg==
@@ -2099,16 +1897,6 @@ safe-regex@^1.1.0:
   dependencies:
     ret "~0.1.10"
 
-"safer-buffer@>= 2.1.2 < 3":
-  version "2.1.2"
-  resolved "https://registry.yarnpkg.com/safer-buffer/-/safer-buffer-2.1.2.tgz#44fa161b0187b9549dd84bb91802f9bd8385cd6a"
-  integrity sha512-YZo3K82SD7Riyi0E1EQPojLz7kpepnSQI9IyPbHHg1XXXevb5dJI7tpyN2ADxGcQbHG7vcyRHk0cbwqcQriUtg==
-
-sax@^1.2.4:
-  version "1.2.4"
-  resolved "https://registry.yarnpkg.com/sax/-/sax-1.2.4.tgz#2816234e2378bddc4e5354fab5caa895df7100d9"
-  integrity sha512-NqVDv9TpANUjFm0N8uM5GxL36UgKi9/atZw+x7YFnQ8ckwFGKrl4xX4yWtrey3UJm5nP1kUbnYgLopqWNSRhWw==
-
 semver-greatest-satisfied-range@^1.1.0:
   version "1.1.0"
   resolved "https://registry.yarnpkg.com/semver-greatest-satisfied-range/-/semver-greatest-satisfied-range-1.1.0.tgz#13e8c2658ab9691cb0cd71093240280d36f77a5b"
@@ -2116,12 +1904,12 @@ semver-greatest-satisfied-range@^1.1.0:
   dependencies:
     sver-compat "^1.5.0"
 
-"semver@2 || 3 || 4 || 5", semver@^5.3.0:
+"semver@2 || 3 || 4 || 5":
   version "5.7.1"
   resolved "https://registry.yarnpkg.com/semver/-/semver-5.7.1.tgz#a954f931aeba508d307bbf069eff0c01c96116f7"
   integrity sha512-sauaDf/PZdVgrLTNYHRtpXa1iRiKcaebiKQ1BJdpQlWH2lCvexQdX55snPFyK7QzpudqbCI0qXFfOasHdyNDGQ==
 
-set-blocking@^2.0.0, set-blocking@~2.0.0:
+set-blocking@^2.0.0:
   version "2.0.0"
   resolved "https://registry.yarnpkg.com/set-blocking/-/set-blocking-2.0.0.tgz#045f9782d011ae9a6803ddd382b24392b3d890f7"
   integrity sha1-BF+XgtARrppoA93TgrJDkrPYkPc=
@@ -2136,11 +1924,6 @@ set-value@^2.0.0, set-value@^2.0.1:
     is-plain-object "^2.0.3"
     split-string "^3.0.1"
 
-signal-exit@^3.0.0:
-  version "3.0.3"
-  resolved "https://registry.yarnpkg.com/signal-exit/-/signal-exit-3.0.3.tgz#a1410c2edd8f077b08b4e253c8eacfcaf057461c"
-  integrity sha512-VUJ49FC8U1OxwZLxIbTTrDvLnf/6TDgxZcK8wxR8zs13xpx7xbG60ndBlhNrFi2EMuFRoeDoJO7wthSLq42EjA==
-
 snapdragon-node@^2.0.1:
   version "2.1.1"
   resolved "https://registry.yarnpkg.com/snapdragon-node/-/snapdragon-node-2.1.1.tgz#6c175f86ff14bdb0724563e8f3c1b021a286853b"
@@ -2262,14 +2045,6 @@ string-width@^1.0.1, string-width@^1.0.2:
     is-fullwidth-code-point "^1.0.0"
     strip-ansi "^3.0.0"
 
-"string-width@^1.0.2 || 2":
-  version "2.1.1"
-  resolved "https://registry.yarnpkg.com/string-width/-/string-width-2.1.1.tgz#ab93f27a8dc13d28cac815c462143a6d9012ae9e"
-  integrity sha512-nOqH59deCq9SRHlxq1Aw85Jnt4w6KvLKqWVik6oA9ZklXLNIOlqg4F2yrT1MVaTjAqvVwdfeZ7w7aCvJD7ugkw==
-  dependencies:
-    is-fullwidth-code-point "^2.0.0"
-    strip-ansi "^4.0.0"
-
 string_decoder@^1.1.1:
   version "1.3.0"
   resolved "https://registry.yarnpkg.com/string_decoder/-/string_decoder-1.3.0.tgz#42f114594a46cf1a8e30b0a84f56c78c3edac21e"
@@ -2291,13 +2066,6 @@ strip-ansi@^3.0.0, strip-ansi@^3.0.1:
   dependencies:
     ansi-regex "^2.0.0"
 
-strip-ansi@^4.0.0:
-  version "4.0.0"
-  resolved "https://registry.yarnpkg.com/strip-ansi/-/strip-ansi-4.0.0.tgz#a8479022eb1ac368a871389b635262c505ee368f"
-  integrity sha1-qEeQIusaw2iocTibY1JixQXuNo8=
-  dependencies:
-    ansi-regex "^3.0.0"
-
 strip-bom@^2.0.0:
   version "2.0.0"
   resolved "https://registry.yarnpkg.com/strip-bom/-/strip-bom-2.0.0.tgz#6219a85616520491f35788bdbf1447a99c7e6b0e"
@@ -2305,11 +2073,6 @@ strip-bom@^2.0.0:
   dependencies:
     is-utf8 "^0.2.0"
 
-strip-json-comments@~2.0.1:
-  version "2.0.1"
-  resolved "https://registry.yarnpkg.com/strip-json-comments/-/strip-json-comments-2.0.1.tgz#3c531942e908c2697c0ec344858c286c7ca0a60a"
-  integrity sha1-PFMZQukIwml8DsNEhYwobHygpgo=
-
 supports-color@^7.1.0:
   version "7.1.0"
   resolved "https://registry.yarnpkg.com/supports-color/-/supports-color-7.1.0.tgz#68e32591df73e25ad1c4b49108a2ec507962bfd1"
@@ -2325,19 +2088,6 @@ sver-compat@^1.5.0:
     es6-iterator "^2.0.1"
     es6-symbol "^3.1.1"
 
-tar@^4.4.2:
-  version "4.4.13"
-  resolved "https://registry.yarnpkg.com/tar/-/tar-4.4.13.tgz#43b364bc52888d555298637b10d60790254ab525"
-  integrity sha512-w2VwSrBoHa5BsSyH+KxEqeQBAllHhccyMFVHtGtdMpF4W7IRWfZjFiQceJPChOeTsSDVUpER2T8FA93pr0L+QA==
-  dependencies:
-    chownr "^1.1.1"
-    fs-minipass "^1.2.5"
-    minipass "^2.8.6"
-    minizlib "^1.2.1"
-    mkdirp "^0.5.0"
-    safe-buffer "^5.1.2"
-    yallist "^3.0.3"
-
 through2-filter@^3.0.0:
   version "3.0.0"
   resolved "https://registry.yarnpkg.com/through2-filter/-/through2-filter-3.0.0.tgz#700e786df2367c2c88cd8aa5be4cf9c1e7831254"
@@ -2584,13 +2334,6 @@ which@^1.2.14:
   dependencies:
     isexe "^2.0.0"
 
-wide-align@^1.1.0:
-  version "1.1.3"
-  resolved "https://registry.yarnpkg.com/wide-align/-/wide-align-1.1.3.tgz#ae074e6bdc0c14a431e804e624549c633b000457"
-  integrity sha512-QGkOQc8XL6Bt5PwnsExKBPuMKBxnGxWWW3fU55Xt4feHozMUhdUMaBCk290qpm/wG5u/RSKzwdAC4i51YigihA==
-  dependencies:
-    string-width "^1.0.2 || 2"
-
 wrap-ansi@^2.0.0:
   version "2.1.0"
   resolved "https://registry.yarnpkg.com/wrap-ansi/-/wrap-ansi-2.1.0.tgz#d8fc3d284dd05794fe84973caecdd1cf824fdd85"
@@ -2610,21 +2353,17 @@ xtend@~4.0.0, xtend@~4.0.1:
   integrity sha512-LKYU1iAXJXUgAXn9URjiu+MWhyUXHsvfp7mcuYm9dSUKK0/CjtrUwFAxD82/mCWbtLsGjFIad0wIsod4zrTAEQ==
 
 y18n@^3.2.1:
-  version "3.2.1"
+  version "3.2.2"
-  resolved "https://registry.yarnpkg.com/y18n/-/y18n-3.2.1.tgz#6d15fba884c08679c0d77e88e7759e811e07fa41"
+  resolved "https://registry.yarnpkg.com/y18n/-/y18n-3.2.2.tgz#85c901bd6470ce71fc4bb723ad209b70f7f28696"
-  integrity sha1-bRX7qITAhnnA136I53WegR4H+kE=
+  integrity sha512-uGZHXkHnhF0XeeAPgnKfPv1bgKAYyVvmNL1xlKsPYZPaIHxGti2hHqvOCQv71XMsLxu1QjergkqogUnms5D3YQ==
-
-yallist@^3.0.0, yallist@^3.0.3:
-  version "3.1.1"
-  resolved "https://registry.yarnpkg.com/yallist/-/yallist-3.1.1.tgz#dbb7daf9bfd8bac9ab45ebf602b8cbad0d5d08fd"
-  integrity sha512-a4UGQaWPH59mOXUYnAG2ewncQS4i4F43Tv3JoAM+s2VDAmS9NsK8GpDMLrCHPksFT7h3K6TOoUNn2pb7RoXx4g==
 
 yargs-parser@^5.0.0:
-  version "5.0.0"
+  version "5.0.1"
-  resolved "https://registry.yarnpkg.com/yargs-parser/-/yargs-parser-5.0.0.tgz#275ecf0d7ffe05c77e64e7c86e4cd94bf0e1228a"
+  resolved "https://registry.yarnpkg.com/yargs-parser/-/yargs-parser-5.0.1.tgz#7ede329c1d8cdbbe209bd25cdb990e9b1ebbb394"
-  integrity sha1-J17PDX/+Bcd+ZOfIbkzZS/DhIoo=
+  integrity sha512-wpav5XYiddjXxirPoCTUPbqM0PXvJ9hiBMvuJgInvo4/lAOTZzUprArw17q2O1P2+GHhbBr18/iQwjL5Z9BqfA==
   dependencies:
     camelcase "^3.0.0"
+    object.assign "^4.1.0"
 
 yargs@^7.1.0:
   version "7.1.0"