T0                          ; select toole
M300 S1000 P100             ; beep
M83                         ; relative extruder mode

M220 S100                   ; reset speed
M221 S100                   ; reset flow
M106 P0 X1.0                ; reset fan max
M572 D0 S0.045              ; pressure advance
;M207 S0.5 Z0 R0 F2400       ; Hemera retracts
M207 S5 Z0 R0 F2400         ; Bowden retracts

M703                        ; run config.g for selected filament

if !move.axes[0].homed || !move.axes[1].homed || !move.axes[2].homed
  G28                       ; Home all

M98 P"0:/macros/Park Head"
; M291 R"Starting print" P"Heating..." T0
M116                        ; wait for temperatures
; M291 R"Starting print" P"Purging..." T0
G1 E10 F100                 ; purge nozzle quickly
G1 E2 F60                   ; purge nozzle slowly
G1 E-0.5 F400               ; retract
G4 P400                     ; await ooze
; M291 R"Starting print" P"OK Go" T5
G90                         ; abs
G1 Z2 F6000                 ; head to Z1
G1 X305 Y150 E0.5 F6000		; in position to wipe
G1 Z0.2						; drop head
G1 Y100 E4 F6000            ; prime/wipe
G1 Y90 E-0.25 F6000         ; courtesy wipe
G1 Z2						; lift head a bit